
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X950-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X950-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel to a precise 920-950 mm window.
Because the nominal 950 mm stroke approaches the 1000 mm maximum limit for this bore, the built-in 30 mm adjustment mechanism is invaluable for dialing in exact end positions without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 920-950 mm retract position during product size transitions without physically replacing the cylinder or adding spacers.
Use the 30 mm rear adjustment screw to fine-tune the final end-of-stroke location during commissioning to hit a precise target.
Leverage the 950 mm travel for long-distance linear positioning tasks on an automated line, guided by external rails.
Choose this 32 mm bore when your application requires moderate force, as stepping down to a smaller bore would sacrifice thrust, while moving up to a 40 mm bore provides 628 N at 0.5 MPa for heavier loads. The adjustable stroke is ideal for machine changeovers, letting you shift the retract end-position by up to 30 mm on the fly instead of swapping out a fixed-stroke SAI cylinder.
Given the 950 mm length, the 12 mm carbon steel rod and M10x1.25 thread will not support high lateral loads alone; an external guide rail is strongly recommended to prevent side-load damage. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air—use an external pilot-operated check valve for fail-safe holding.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At 0.7 MPa the push force increases to 563 N.
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the 950 mm nominal stroke down to 920 mm, giving you a 30 mm tuning window without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.