verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-40

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X950-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke950 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$143.27 $150.77Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-40

It features a carbon steel piston rod and PT tapered port threads. By integrating an external adjusting screw, this model provides a usable travel window of 910 to 950 mm, allowing precise end-position tuning without swapping components.

Because the 950 mm stroke is exceptionally long for a 32 mm bore, the 12 mm rod requires external guiding to prevent excessive side-loading. The rear adjuster functions strictly as a travel stop and works alongside variable air cushions at both ends, but it does not lock the load without live air pressure. For position holding, consider an external rod lock or the SAIL series.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-40 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X950-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke950 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-40

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×950Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-40 Is Used

tune

Long-Reach Positioning

Ideal for extending actuators across wide machine beds, using the 40 mm adjustment to perfectly dial in the 910-950 mm travel limit during installation.

settings_input_component

Product Changeover

Quickly adapt automated lines to new part sizes by turning the rear stopper, shifting the end position without replacing the entire cylinder.

conveyor_belt

Extended Transfer Stops

Acts as a precise, adjustable end-stop on long conveyor systems where a 950 mm extension is needed to push or stage materials.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-40 the Right Cylinder?

Choose this 32 mm bore cylinder when an application demands a highly extended stroke with on-the-fly end-stop adjustments, yielding 345N of pull force at 0.5 MPa. If your setup requires greater thrust, stepping up to the 40 mm bore increases push force to 628N. The SAIJ design is selected over a fixed SAI cylinder when you need to fine-tune the retract position during commissioning or product changeovers.

To match this exact configuration for an ISO 15552 replacement, specify a 32 mm bore, 950 mm stroke, 40 mm adjustment range, PT port threads, and no magnet. Note that SAIJ supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. Given the 950 mm stroke, ensure an external guide supports the load to manage side-load forces.

AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-40 FAQ

The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the effective travel from 950 mm down to 910 mm. It sets the end position but does not hold the load pneumatically without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-40

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ32X950-40 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.