
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X950-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X950-75 is a double-acting ISO 15552 profile cylinder featuring a rear mechanical stroke adjuster. It provides a usable travel window of 875 to 950 mm, allowing you to dial back the stroke by up to 75 mm during machine commissioning without adding external stopper blocks.
This model uses a 12 mm carbon steel piston rod with an M10x1.25 thread, paired with a PT G1/8 port. The extruded aluminum barrel incorporates sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches. The rear adjuster functions strictly as a travel stop to set the end position; it does not hold the load dynamically, and the variable air cushions only manage deceleration.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 875-950 mm end-of-stroke position during initial machine build without machining custom spacers or swapping the entire cylinder.
Quickly adapt the retract end-stop by up to 75 mm when a production line switches to a different product length or packaging format.
Serve as an adjustable diverter or gate actuator on extended conveyor lines where the exact stopping position of passing goods must be fine-tuned on the fly.
Choose this 32 mm bore adjustable-stroke cylinder when your setup requires precise end-position tuning across an 875-950 mm window. The rear screw adjuster allows rapid product changeovers compared to swapping a fixed-stroke SAI cylinder. Because this unit lacks a magnet, position sensing requires external targets. For any load-holding requirements without live air pressure, this plain SAIJ is insufficient; consider an AirTAC SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external pilot-operated check valve.
At 950 mm of total travel, the 12 mm rod is highly susceptible to side-loading and sagging. An external guide rail must be used to prevent premature seal wear and binding. This cylinder is dimensionally interchangeable per ISO 15552 mounting interfaces and supports the SAIJ mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Operating speed ranges from 30 to 800 mm/s.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At the maximum operating pressure of 1.0 MPa, it achieves 82 kgf of push force.
The rear adjuster screw acts as a mechanical stop that shortens the effective travel from the nominal 950 mm down to a minimum of 875 mm. This stopper sets the end position and works alongside the air cushions for deceleration, but it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.