Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X10SB
The AirTAC Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X10SB is a genuine single acting, push (spring return) ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeSingle acting, push (spring return)
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X10SB
A single acting push cylinder with spring return, the ASE32X10SB extends its 12 mm rod with air and lets the return spring retract it, so one air line is all the plumbing needs. The 32 mm bore delivers 352.5 N of push at 0.5 MPa (513.4 N at 0.7 MPa), already net of the spring, and it starts moving from just 0.2 MPa. The 10 mm stroke suits short eject, clamp and present moves where travel is minimal.
The body is an ISO 21287 compact build: a hard-anodized aluminium barrel with an S45C hard-chrome-plated rod, saving about 50% of the mounting length of an ISO 15552 profile cylinder. A fixed TPU bumper absorbs end-of-stroke shock at both ends, and the optional -S magnet (fitted on this model) accepts CMSE / DMSE switches for end-of-stroke signalling. At 0.5 MPa the push equates to roughly 36 kgf, so plan on lifting about 18 kg vertically with a 2:1 margin.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X10SB Technical Specifications
| Model | Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X10SB |
|---|---|
| Series | ASE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Single acting, push (spring return) |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force (spring return) |
|---|---|
| 0.5 MPa | 352.5 N |
| 0.7 MPa | 513.4 N |
Single-acting push: air extends the rod; the return spring retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X10SB
| ASE | ISO 21287 compact cylinder (single-acting push, spring-return). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X10SB Is Used
Fixture part ejection
A 10 mm kick on a CNC jig pushes a machined housing off its locating pin between cycles; the spring retracts instantly when the 1/8" port vents.
Presence clamping on assembly lines
Short-stroke clamping of a connector housing during a screwdriving step, with a CMSE switch on the -S magnet confirming full extension at 352.5 N push.
Carton flap kickers
On a packaging machine, the compact body tucks into tight guarding to flip a flap or index a light box, then the spring pulls the rod home for the next carton.
Is the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X10SB the Right Cylinder?
At 352.5 N push at 0.5 MPa, this bore sits between the 25 mm (210.1 N) and 40 mm (556.8 N) single-acting sizes; step up to 40 mm if your load needs more margin, or down to 25 mm for lighter parts. Remember the spring retracts the rod on air loss, so it returns to the retracted home position rather than holding a mid-stroke load. The B code gives a male rod thread and the port is 1/8"; pair it with FA/FB flange, LB foot, CA/CB clevis, CR, SDB or FTC mounting on the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X10SB FAQ
Push is 352.5 N at 0.5 MPa and 513.4 N at 0.7 MPa, both already net of the return spring. Minimum working pressure is 0.2 MPa (28 psi), the operating range is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof, speed is 50-500 mm/s, and air must be filtered to 40 um. It is single acting push: air extends, the spring retracts.
The ISO 21287 compact build saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow jigs and guarded gantries. A fixed TPU bumper at each end absorbs end-of-stroke shock. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped to the body; models ordered without the -S code have no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.