Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X5S
The AirTAC Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X5S is a genuine single acting, push (spring return) ISO 21287 compact air cylinder with a Ø32mm bore and 5mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke5 mm
- Port size1/8"
- Acting typeSingle acting, push (spring return)
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X5S
This AirTAC ASE32X5S is a compact single acting push cylinder with spring return, sized for short-stroke automation. It delivers 352.5 N of push force at 0.5 MPa (net of the return spring) and 513.4 N at 0.7 MPa, so it suits light clamping and positioning tasks.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, fitting tight jigs and guards. The optional -S magnet is fitted here, enabling CMSE or DMSE switches for position sensing. For a safe working load, plan around 212 N at 0.5 MPa, which lifts about 22 kg vertically with a 2:1 margin.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X5S Technical Specifications
| Model | Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X5S |
|---|---|
| Series | ASE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Single acting, push (spring return) |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force (spring return) |
|---|---|
| 0.5 MPa | 352.5 N |
| 0.7 MPa | 513.4 N |
Single-acting push: air extends the rod; the return spring retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X5S
| ASE | ISO 21287 compact cylinder (single-acting push, spring-return). |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X5S Is Used
Jig Clamping
Use in a small jig to clamp a plastic part during drilling, with the spring retracting the rod when air is released.
Label Applicator
Drive a label tamp head for a 5 mm stroke on a packaging line, pushing labels onto boxes at up to 500 mm/s.
Guard Interlock
Activate a safety guard latch on a machine enclosure, where the compact body fits behind a panel and the spring returns the pin.
Is the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X5S the Right Cylinder?
For a lighter duty, the ASE25X5 offers 210.1 N at 0.5 MPa, while the ASE40X5 steps up to 556.8 N. This 32 mm bore suits compact fixtures where space is limited, but remember the spring retracts the rod and does not hold a mid-stroke position. Mounting options include FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, or FTC brackets, and the 1/8" port simplifies air routing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X5S FAQ
At 0.5 MPa, the push force is 352.5 N, and at 0.7 MPa it is 513.4 N, both net of the return spring. Minimum working pressure is 0.2 MPa, and proof pressure is 1.5 MPa (215 psi).
The ISO 21287 body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into compact jigs and guards. It uses a fixed TPU bumper at both ends, and the optional -S magnet here allows CMSE or DMSE sensors to detect the rod position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE32X5S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.