Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE50X25
The AirTAC Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE50X25 is a genuine single acting, push (spring return) ISO 21287 compact air cylinder with a Ø50mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke25 mm
- Port size1/8"
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE50X25
This AirTAC ASE50X25 is a single acting push cylinder with spring return, so air extends the rod and the spring pulls it back. It delivers 875.5 N of push force at 0.5 MPa, already net of the return spring, and needs a minimum of 0.2 MPa to move.
Its ISO 21287 compact body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarded areas. The hard-anodized aluminium body and S45C hard-chrome rod resist wear, and the fixed TPU bumper at both ends absorbs end-of-stroke impact. For a safe working load, plan for about 525 N of real work at 0.5 MPa, which lifts roughly 54 kg vertically with a 2:1 margin.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE50X25 Technical Specifications
| Model | Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE50X25 |
|---|---|
| Series | ASE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 25 mm |
| Acting type | Single acting, push (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force (spring return) |
|---|---|
| 0.5 MPa | 875.5 N |
| 0.7 MPa | 1268.2 N |
Single-acting push: air extends the rod; the return spring retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE50X25
| ASE | ISO 21287 compact cylinder (single-acting push, spring-return). |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE50X25 Is Used
Jig Clamping
Use the ASE50X25 to clamp small parts in a CNC fixture, where the 875.5 N push at 0.5 MPa holds a component firmly and the spring releases it quickly for the next cycle.
Sorting Gate
In a packaging line, this cylinder can push a 25 mm stroke to divert lightweight boxes onto a reject conveyor, with the spring returning the gate to its home position after each pass.
Guard Interlock
Mount it on a machine guard to push a locking pin into place, ensuring the guard stays closed during operation; the spring retracts the pin when air is removed, allowing safe access.
Is the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE50X25 the Right Cylinder?
Choose this 50 mm bore if you need a compact, spring-return actuator for short 25 mm strokes. For lighter duty, the 40 mm bore gives 556.8 N at 0.5 MPa, while the 63 mm bore provides 1420.5 N for heavier pushes. The spring retracts the rod on air loss, but it does not hold a mid-stroke position, so use it for simple extend-and-return tasks.
Mounting options include FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets, all fitting the ISO 21287 face. This model has no magnet, so order the -S code if you need to fit CMSE or DMSE sensors for position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE50X25 FAQ
At 0.5 MPa, the push force is 875.5 N, and at 0.7 MPa it is 1268.2 N, both net of the return spring. The minimum working pressure is 0.2 MPa, and the proof pressure is 1.5 MPa (215 psi). Operating pressure range is 0.2-1.0 MPa (28-145 psi).
The ASE50X25 body is about 50% shorter than an ISO 15552 profile cylinder, so it fits in confined areas like machine guards or gantries. It uses a fixed TPU bumper at both ends to absorb impact, and you can mount it with FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, or FTC brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE50X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.