Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE63X15SB
The AirTAC Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE63X15SB is a genuine single acting, push (spring return) ISO 21287 compact air cylinder with a Ø63mm bore and 15mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke15 mm
- Port size1/8"
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE63X15SB
This AirTAC ASE63X15SB is a single acting push cylinder with spring return, extending on air and retracting via the built-in spring. With a 63 mm bore, it delivers 1420.5 N of push force at 0.5 MPa (net of the spring), so it suits moderate clamping and pressing tasks.
Its ISO 21287 compact body is about 50% shorter than an ISO 15552 profile cylinder, saving space in tight fixtures. The optional -S magnet is fitted here, enabling CMSE or DMSE switches for position sensing. For a safe working load, plan for about 853 N of real work at 0.5 MPa, which lifts roughly 87 kg vertically with a 2:1 margin.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE63X15SB Technical Specifications
| Model | Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE63X15SB |
|---|---|
| Series | ASE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Single acting, push (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force (spring return) |
|---|---|
| 0.5 MPa | 1420.5 N |
| 0.7 MPa | 2044.0 N |
Single-acting push: air extends the rod; the return spring retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE63X15SB
| ASE | ISO 21287 compact cylinder (single-acting push, spring-return). |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE63X15SB Is Used
Jig Clamping
Use in a CNC fixture to clamp a workpiece with 1420.5 N force at 0.5 MPa, where the compact body fits under a guard.
Carton Press
Drive a light press to flatten cardboard boxes in a packaging line, leveraging the 15 mm stroke for quick cycles.
Gate Stop
Actuate a safety gate stop on a conveyor, with the spring return ensuring the rod retracts when air is off.
Is the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE63X15SB the Right Cylinder?
Compare with the 50 mm bore ASE50X25, which pushes 875.5 N at 0.5 MPa, or step up to the 80 mm bore ASE80X25 for 2316.2 N. This 63 mm model offers a middle ground with a 15 mm stroke, ideal for short travel. Remember, the spring retracts the rod and does not hold a mid-stroke position, so use it for push-only actions. Mounting options include FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets, with the male rod thread (B) ready for direct coupling.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE63X15SB FAQ
At 0.5 MPa, the push force is 1420.5 N, and at 0.7 MPa it is 2044 N, both net of the return spring. The minimum working pressure is 0.2 MPa, and the proof pressure is 1.5 MPa (215 psi).
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into confined jigs or gantries. The fixed TPU bumper at both ends absorbs end-of-stroke energy, and the optional -S magnet allows CMSE or DMSE sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE63X15SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.