Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X15S
The AirTAC Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X15S is a genuine single acting, push (spring return) ISO 21287 compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke15 mm
- Port size1/4"
- Acting typeSingle acting, push (spring return)
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X15S
This AirTAC ASE80X15S is a single acting push cylinder with spring return, meaning air extends the rod and the built-in spring retracts it. With an 80 mm bore, it delivers 2316.2 N of push force at 0.5 MPa, net of the spring, so you can plan real work around that figure.
Its ISO 21287 compact body is about 50% shorter than an ISO 15552 profile cylinder, fitting tight spaces like guarding and gantries. The optional -S magnet is fitted here, enabling CMSE or DMSE switches for position sensing. For a safe working load, plan for about 1390 N (roughly 142 kg) of vertical lift at 0.5 MPa, not the full rating.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X15S Technical Specifications
| Model | Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X15S |
|---|---|
| Series | ASE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Single acting, push (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force (spring return) |
|---|---|
| 0.5 MPa | 2316.2 N |
| 0.7 MPa | 3321.5 N |
Single-acting push: air extends the rod; the return spring retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X15S
| ASE | ISO 21287 compact cylinder (single-acting push, spring-return). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X15S Is Used
Jig Clamping
Use the 2316.2 N push at 0.5 MPa to clamp a workpiece in a CNC fixture, with the spring retracting the rod for quick part release.
Conveyor Stop
In a packaging line, this cylinder can push a light carton off a conveyor at 50-500 mm/s, and the spring returns it to clear the path.
Guard Door Lock
Mount it on a machine guard to push a locking pin into place, using the compact body to fit behind the guard panel.
Is the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X15S the Right Cylinder?
When sizing, compare this 80 mm bore with a 63 mm bore, which pushes 1420.5 N at 0.5 MPa, or a 100 mm bore at 3640.7 N. This 15 mm stroke is within the 25 mm standard limit for this bore, so it is a standard model. The spring returns the rod at rest and on air loss, so it does not hold a mid-stroke position. Mounting options like FA/FB flange, LB foot, or CA/CB clevis bolt to the ISO 21287 face, and the -S magnet allows sensor feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X15S FAQ
At 0.5 MPa, the push force is 2316.2 N, and at 0.7 MPa it is 3321.5 N, both net of the return spring. The minimum working pressure is 0.2 MPa, and the proof pressure is 1.5 MPa (215 psi).
The body is about 50% shorter than an ISO 15552 profile cylinder, so it fits in tight jigs and guards. It has a fixed TPU bumper at both ends to absorb end-of-stroke impact, and the optional -S magnet here allows CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X15S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.