Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X5SB
The AirTAC Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X5SB is a genuine single acting, push (spring return) ISO 21287 compact air cylinder with a Ø80mm bore and 5mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke5 mm
- Port size1/4"
- Acting typeSingle acting, push (spring return)
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X5SB
This ASE80X5SB is a single acting push cylinder with spring return, so air extends the rod and the built-in spring pulls it back. It delivers 2316.2 N of push force at 0.5 MPa (net of the spring), which is enough to handle moderate clamping or pressing tasks in a compact envelope.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, letting you fit it into tight jigs and guarded cells. The optional -S magnet is fitted here, so CMSE or DMSE reed and solid-state switches can track the rod position. For a safe working load at 0.5 MPa, plan for about 1390 N of real work, which lifts roughly 142 kg vertically with a 2:1 margin.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X5SB Technical Specifications
| Model | Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X5SB |
|---|---|
| Series | ASE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Single acting, push (spring return) |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force (spring return) |
|---|---|
| 0.5 MPa | 2316.2 N |
| 0.7 MPa | 3321.5 N |
Single-acting push: air extends the rod; the return spring retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X5SB
| ASE | ISO 21287 compact cylinder (single-acting push, spring-return). |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X5SB Is Used
Jig Clamping
Use the ASE80X5SB to clamp a workpiece in a CNC fixture. The 2316.2 N push at 0.5 MPa secures parts firmly, and the short stroke cycles quickly for load-unload operations.
Press Operation
In a small bench press, this cylinder provides a controlled 2316.2 N force at 0.5 MPa to press bearings into housings. The fixed TPU bumper absorbs end-of-stroke impact, protecting the tooling.
Automated Assembly
On an assembly line, use the ASE80X5SB to insert pins or dowels into parts. Its compact body fits under a guard, and the optional -S magnet lets a sensor confirm each cycle.
Is the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X5SB the Right Cylinder?
For lighter duty, consider the ASE63X5 with 1420.5 N push at 0.5 MPa, while the ASE100X5 offers 3640.7 N if you need more force. This 80 mm bore with a 5 mm stroke suits short, repetitive motions where space is tight. The male rod thread (B code) simplifies coupling to fixtures, and the 1/4" port matches standard air lines. Since it is single acting, it returns by spring on air loss, so it does not hold a mid-stroke position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X5SB FAQ
At 0.5 MPa, the push force is 2316.2 N, and at 0.7 MPa it reaches 3321.5 N. These values are net of the return spring, so they are the usable forces. The minimum working pressure is 0.2 MPa, and the proof pressure is 1.5 MPa (215 psi).
The ISO 21287 body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so it fits into confined jigs and machine guards. It has a hard-anodized aluminium body and a fixed TPU bumper at both ends, which reduces noise and wear. The optional -S magnet enables CMSE or DMSE sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE80X5SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.