Airtac ATE Single Acting Guided Compact Cylinder ATE50X25B
The AirTAC Airtac ATE Single Acting Guided Compact Cylinder ATE50X25B is a genuine single acting, pull (spring return) ISO 21287 compact air cylinder with a Ø50mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke25 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATE Single Acting Guided Compact Cylinder ATE50X25B
A single acting pull cylinder of the ISO 21287 compact family, the ATE50X25B uses a return spring to keep the rod extended at rest, while compressed air retracts it. At 0.5 MPa the 50 mm bore delivers a net pull of 775 N (1127.5 N at 0.7 MPa), already subtracting the spring force. The male rod thread from the B code bolts straight to external knuckles, and the body runs on 0.2-1.0 MPa (28-145 psi) filtered air.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight clamping nests and guarded assemblies. In practice, plan on roughly 465 N of real work at 0.5 MPa, and expect it to lift about 39 kg vertically once a 2:1 margin is applied. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the optional -S magnet enables CMSE / DMSE switches when ordered.
Airtac ATE Single Acting Guided Compact Cylinder ATE50X25B Technical Specifications
| Model | Airtac ATE Single Acting Guided Compact Cylinder ATE50X25B |
|---|---|
| Series | ATE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 25 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 775.0 N |
| 0.7 MPa | 1127.5 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ATE Single Acting Guided Compact Cylinder ATE50X25B
| ATE | ISO 21287 compact cylinder (single-acting pull, spring-return). |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ATE Single Acting Guided Compact Cylinder ATE50X25B Is Used
Clamp-release on a welding fixture
The spring holds the clamp arm closed on a car-body bracket jig; a 3/2 valve vents air to pull the 16 mm rod back and release the part between welds.
Carton eject from a case packer
Normally-extended pusher kicks a formed carton off a flight at the end of a 25 mm stroke; on air loss the spring re-extends so the lane never jams.
Gate lift with position check
Order the -S magnet and a DMSE switch to confirm the retracted state of a small inspection gate on a bottling line before the vision station fires.
Is the Airtac ATE Single Acting Guided Compact Cylinder ATE50X25B the Right Cylinder?
For this 25 mm pull class, the 40 mm bore offers 500.3 N at 0.5 MPa if your load is lighter, while the 63 mm bore reaches 1320 N when you need more grip. Remember that on air loss the spring returns the rod to its extended home position - it will not hold a mid-stroke pose. Choose LB foot or FA/FB flange brackets for fixed jigs, CA/CB clevis or SDB pivot for swinging levers, and add the -S code only if you need CMSE / DMSE position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATE Single Acting Guided Compact Cylinder ATE50X25B FAQ
Net of the return spring, this 50 mm bore single acting pull cylinder gives 775 N at 0.5 MPa and 1127.5 N at 0.7 MPa. Working pressure is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof pressure, air filtered to 40 um, speed 50-500 mm/s, and a 25 mm stroke on a 16 mm rod with male thread.
It is an ISO 21287 compact build whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot and FTC brackets plus I/Y knuckles available. Fixed TPU bumpers at both ends absorb end-of-stroke impact, and the optional -S magnet allows CMSE / DMSE switches; without -S no magnet is fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ATE Single Acting Guided Compact Cylinder ATE50X25B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.