Airtac ATE Single Acting Guided Compact Cylinder ATE63X10B
The AirTAC Airtac ATE Single Acting Guided Compact Cylinder ATE63X10B is a genuine single acting, pull (spring return) ISO 21287 compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATE Single Acting Guided Compact Cylinder ATE63X10B
This ATE63X10B is a single acting pull cylinder, with a spring that extends the rod and air that retracts it. At 0.5 MPa it delivers a net pull of 1320 N, and at 0.7 MPa that rises to 1903.2 N, figures that already account for the return spring.
The ISO 21287 compact body is about 50% shorter than an ISO 15552 profile cylinder, which helps when space is tight. With a 63 mm bore and 10 mm stroke, this unit has a male rod thread (B code) and a 1/8" port. The fixed TPU bumper at each end absorbs the impact of short, rapid cycles, and the hard-anodized aluminium body keeps the weight down without sacrificing rigidity.
Airtac ATE Single Acting Guided Compact Cylinder ATE63X10B Technical Specifications
| Model | Airtac ATE Single Acting Guided Compact Cylinder ATE63X10B |
|---|---|
| Series | ATE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 1320.0 N |
| 0.7 MPa | 1903.2 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ATE Single Acting Guided Compact Cylinder ATE63X10B
| ATE | ISO 21287 compact cylinder (single-acting pull, spring-return). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ATE Single Acting Guided Compact Cylinder ATE63X10B Is Used
Jig Clamping
Use the 1320 N pull to securely clamp a workpiece in a CNC milling fixture. The short stroke and compact body fit within the machine's tight envelope, and the spring return lifts the clamp clear when air is removed.
Label Applicator
In a carton labeling line, this cylinder can retract a label applicator head after each cycle. The 10 mm stroke is enough for precise placement, and the fixed TPU bumper prevents harsh stops at high cycle rates.
Gate Lock Pin
On a safety gate for a robotic cell, the ATE63X10B pulls a locking pin out of a receiver. The spring extends the pin to lock the gate when air pressure is off, providing a fail-safe condition. The 1903.2 N pull at 0.7 MPa easily overcomes any minor misalignment.
Is the Airtac ATE Single Acting Guided Compact Cylinder ATE63X10B the Right Cylinder?
For a lighter pull, consider the ATE50X10 with 775 N at 0.5 MPa, or step up to the ATE80X10 which offers 2159.1 N at the same pressure. This 63 mm bore model suits applications needing a moderate pull force with a compact footprint. Remember, the spring returns the rod to its extended position on air loss; it will not hold a load at mid-stroke. The male rod thread simplifies direct attachment of fixtures, and the 1/8" port is standard for this bore size.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ATE Single Acting Guided Compact Cylinder ATE63X10B FAQ
The net pull force, after accounting for the return spring, is 1320 N at 0.5 MPa and 1903.2 N at 0.7 MPa. The minimum working pressure to overcome the spring is 0.2 MPa, and the maximum is 1.0 MPa (145 psi).
The ATE63X10B's body is about 50% shorter than an ISO 15552 profile cylinder, saving valuable mounting space in tight fixtures. It also features a fixed TPU bumper at both ends to absorb energy, and the optional -S magnet (not included here) can be added for position sensing with CMSE or DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ATE Single Acting Guided Compact Cylinder ATE63X10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.