This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE25X10B — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE25X10B in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP25X10B
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP25X10B is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø25mm bore and 10mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE25X10B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ25 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeSingle acting, pull (spring return)
- Rod threadM6×1.0
- StatusDiscontinued → ATE25X10B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP25X10B
A single acting pull cylinder with spring return, the ATP25X10B keeps its 10 mm rod extended by spring force and retracts only when compressed air arrives at the M5x0.8 port. At 0.5 MPa the pull is 170.9 N net of the spring, rising to 253.3 N at 0.7 MPa, and at least 0.2 MPa is needed to overcome the spring. This model is discontinued; the current drop-in is ATE25X10, so confirm ISO 21287 mounting dimensions before swapping.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight jigs and guarding on packaging machines. Plan on roughly 102 N of usable pull at 0.5 MPa, about 10 kgf, so for a 2:1 margin it lifts about 5 kg vertically. The male rod thread (B code) bolts straight to I/Y knuckles, and the fixed TPU bumper at each end absorbs end-of-travel shock. Without the -S code there is no magnet, so CMSE or DMSE switches need the optional magnet ordered.
Airtac ATP Single Acting Port Compact Cylinder ATP25X10B Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP25X10B |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE25X10B |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE25X10B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 170.9 N |
| 0.7 MPa | 253.3 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP25X10B
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP25X10B Is Used
Spring-extended clamp on a bottling line
The spring holds a bottle gripper open at rest; 170.9 N of air pull at 0.5 MPa retracts it for a 10 mm release cycle at up to 500 mm/s.
Return-home ejector on a small assembly press
On air loss the rod springs back to extended home, clearing the die area; about 5 kg vertical lift with a 2:1 margin covers light part trays.
Position-flagged slide gate in a test rig
Order the -S magnet version to run CMSE or DMSE switches at both ends of the 10 mm stroke; the standard code carries no magnet.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP25X10B with the ATE25X10B
For a 10 mm retraction stroke with about 171 N of pull, the 25 mm bore is the right class; step down to ATP20X10 (88.1 N at 0.5 MPa) for lighter clamps or up to ATP32X10 (296.0 N) for heavier grippers. Remember the spring only returns the rod to its extended home position, so it will not hold a mid-stroke point. Choose FA/FB flange, LB foot or CA/CB clevis to match the fixture, and add -S if position sensing is required. Order ATE25X10 as the current-production replacement.
Replacement checklist
- ✓ Current-production ACE → ATE25X10B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP25X10B FAQ
Net of the return spring, pull is 170.9 N at 0.5 MPa and 253.3 N at 0.7 MPa. Working range is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof pressure; at least 0.2 MPa is required to beat the spring. Speed is 50-500 mm/s, air must be filtered to 40 um, and temperature spans -20 to +70 C.
The ISO 21287 short body cuts about 50% of the mounting length of an ISO 15552 profile cylinder, and FA/FB flange, LB foot or CA/CB clevis mounts bolt to the standard face. The model is discontinued; ATE25X10 is the current drop-in in the same bore, stroke and force class, so verify ISO 21287 mounting dimensions before ordering.
Request a Quote for the ATE25X10B
Send us the quantity and destination. We confirm price, stock and lead time on the ATE25X10B replacement — usually within 7-8 hours.