This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE63X25SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE63X25SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP63X25SB
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP63X25SB is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø63mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE63X25SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke25 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.5
- StatusDiscontinued → ATE63X25SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP63X25SB
A single acting pull cylinder with spring return, the ATP63X25SB keeps its 16 mm rod extended by the spring and retracts it with air pressure. At 0.5 MPa the net pull is 1320 N, rising to 1903.2 N at 0.7 MPa, with the minimum 0.2 MPa needed just to overcome the spring. The 63 mm bore takes a 1/8" port and the B code gives a male rod thread. Note that the ATP family is discontinued; the current drop-in is the ATE63X25, so confirm ISO 21287 mounting dimensions before swapping.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight jigs and guarding. Because the S code is on this model, the magnet is fitted and CMSE or DMSE reed and solid-state switches can be mounted directly on the body. For real-world sizing, plan on roughly 792 N of usable pull at 0.5 MPa, which is about 67 kg of vertical lift with a 2:1 margin. A fixed TPU bumper sits at both ends and speed runs 50-500 mm/s.
Airtac ATP Single Acting Port Compact Cylinder ATP63X25SB Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP63X25SB |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE63X25SB |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE63X25SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 1320.0 N |
| 0.7 MPa | 1903.2 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP63X25SB
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP63X25SB Is Used
Clamp retraction on a machining fixture
The 1320 N net pull at 0.5 MPa retracts a clamp arm on a CNC milling jig, and the spring pushes the arm back out the moment air is lost.
Gate return on a packaging line
A 25 mm stroke is enough to pull a small divert gate clear on a bottling conveyor, with the 1/8" port keeping plumbing compact behind the guard.
Position feedback on a lift-and-locate
With the fitted -S magnet, a DMSE switch confirms the retracted home position of a locate pin on an automotive assembly fixture.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP63X25SB with the ATE63X25SB
Size against neighbours: the 50 mm bore pulls 775 N at 0.5 MPa while the 80 mm bore reaches 2159.1 N, so 1320 N at 0.5 MPa places this 63 mm unit in the middle of the range. Remember the spring returns the rod to its extended home position on air loss and will not hold a mid-stroke position. Mounting brackets FA/FB flange, LB foot and CA/CB clevis bolt to the standard face, and the optional -S magnet enables CMSE / DMSE switches. Order the ATE63X25 as the current-production replacement.
Replacement checklist
- ✓ Current-production ACE → ATE63X25SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP63X25SB FAQ
The figures are net of the return spring: 1320 N at 0.5 MPa and 1903.2 N at 0.7 MPa. The spring extends the rod and air retracts it, so at least 0.2 MPa is needed to move the rod. Operating range is 0.2-1.0 MPa (28-145 psi) with proof pressure of 1.5 MPa (215 psi), speed 50-500 mm/s, and a fixed TPU bumper at both ends.
Order the ATE63X25, the current-production successor: swap the P for an E and you get the same 63 mm bore, 25 mm stroke and force class in an ISO 21287 compact body. Because the ATP is DIN-standard, confirm the ISO 21287 mounting dimensions against your fixture before swapping, and check FA/FB, LB or CA/CB bracket fit at the same time.
Related AirTAC ACE Cylinders
Request a Quote for the ATE63X25SB
Send us the quantity and destination. We confirm price, stock and lead time on the ATE63X25SB replacement — usually within 7-8 hours.