Airtac B01-MA Special Cylinder B01-MA25X100SCA
The AirTAC Airtac B01-MA Special Cylinder B01-MA25X100SCA is a genuine double acting standard round-body mini air cylinder with a Ø0mm bore and 100mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ0 mm
- Stroke100 mm
- Port sizePT/G
- Acting typeDouble acting
- Rod thread
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MA Special Cylinder B01-MA25X100SCA
With a 100 mm stroke on a 25 mm bore, this AirTAC MA series round-body mini cylinder pushes 245.3 N at 0.5 MPa (22-145 psi operating range) and retracts with 206.1 N, plenty for ejecting, clamping and lifting small parts on packaging and assembly machines. The rod is double-acting in both directions, and fixed anti-impact bumper pads soften the stop at each end of travel, running smoothly from 30 to 800 mm/s. The riveted stainless-steel barrel shrugs off mild corrosion and washdown where painted minis would chip, and the CA pivot back cover accepts a clevis or rod knuckle directly for swinging linkages. A magnet comes built in as standard, so CMSG, DMSG or EMSG switches drop straight onto the barrel; with a 0.6 derating, size real work at about 147 N, and the bore lifts roughly 12 kg vertically with a 2:1 margin.
Airtac B01-MA Special Cylinder B01-MA25X100SCA Technical Specifications
| Model | Airtac B01-MA Special Cylinder B01-MA25X100SCA |
|---|---|
| Series | MA mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MA Special Cylinder B01-MA25X100SCA
| MA | Standard round-body mini cylinder (double-acting). |
|---|---|
| 0 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B01-MA Special Cylinder B01-MA25X100SCA Is Used
Carton flap tuck station
The 245.3 N push at 0.5 MPa folds and tucks cardboard flaps on a carton closer, while the CA pivot rear cover lets the cylinder swing with the flap arm.
Bottle push-off on a filler line
Mounted alongside a rinse conveyor, the 100 mm stroke kicks off-spec bottles sideways into a reject chute, with the stainless barrel handling the wet zone.
Fixture clamp on a drill jig
The 206.1 N return force retracts the clamp platen clear of the jig, and the built-in magnet with a CMSG switch confirms release before the drill cycle starts.
Is the Airtac B01-MA Special Cylinder B01-MA25X100SCA the Right Cylinder?
Match the job to 245.3 N push and 206.1 N pull at 0.5 MPa: drop to a 20 mm bore (157 N push) for lighter sorting arms, or step up to 32 mm (402.2 N push) when the part weight climbs. Remember this cylinder drifts when air is removed, so add a rod lock or pilot check valve if a mid-stroke load must stay put. The CA pivot rear cover pairs naturally with the SDB pivot bracket or I and Y rod knuckles, and the 100 mm stroke on a 10 mm rod should be shielded from side loads to protect the hard-chrome plating. Every unit carries the standard magnet, so position sensing needs no special order.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MA Special Cylinder B01-MA25X100SCA FAQ
At 0.5 MPa the 25 mm bore pushes 245.3 N and pulls 206.1 N. At 0.7 MPa those rise to 343.4 N push and 288.5 N pull. The theoretical maximum force at 1.0 MPa is 50 kgf. Operating pressure spans 0.15-1.0 MPa (22-145 psi) and the double-acting rod travels at 30-800 mm/s.
The CA pivot back cover gives you a clevis-style pivot point out of the box, ideal for linkages that swing through an arc. Combine it with FA flange, LB foot or SDB pivot brackets on the body and I or Y rod knuckles on the 10 mm rod (M10x1.25 thread). Air ports are 1/8 inch, and the magnet fitted as standard accepts CMSG, DMSG and EMSG reed or Hall switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MA Special Cylinder B01-MA25X100SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.