Airtac B01-MA Special Cylinder B01-MA32X100SCA
The AirTAC Airtac B01-MA Special Cylinder B01-MA32X100SCA is a genuine double acting standard round-body mini air cylinder with a Ø0mm bore and 100mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ0 mm
- Stroke100 mm
- Port sizePT/G
- Acting typeDouble acting
- Rod thread
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MA Special Cylinder B01-MA32X100SCA
Around the machine frame this 32 mm bore MA piston puts out 402 N of push and 345.6 N of pull at 0.5 MPa, climbing to 563 N at 0.7 MPa, all inside a compact round body that slips into gaps a profile tube never could. Air works the piston in both directions since the series is fully double acting, and the 12 mm hard-chrome plated rod runs through a 1/8" PT port on every 32 mm unit. Construction is a stainless-steel barrel with aluminium-alloy covers rolled and riveted onto the tube, so the sealed joint tolerates washdown spray and mildly corrosive spots far better than painted-steel minis. Fixed bumper pads soften the stroke ends - they decelerate the piston but are not adjustable air cushions. For sizing, count on roughly 241 N of real working effort at 0.5 MPa and expect about 20 kg of vertical lifting with a 2:1 margin.
Airtac B01-MA Special Cylinder B01-MA32X100SCA Technical Specifications
| Model | Airtac B01-MA Special Cylinder B01-MA32X100SCA |
|---|---|
| Series | MA mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MA Special Cylinder B01-MA32X100SCA
| MA | Standard round-body mini cylinder (double-acting). |
|---|---|
| 0 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B01-MA Special Cylinder B01-MA32X100SCA Is Used
Tray push-off on a snack-food line
The 402 N push at 0.5 MPa slides a loaded carton tray off a transfer plate at mid stroke, and the stainless barrel shrugs off the grease and crumbs around the wrapper station.
Small-part ejection under a bench die
Double-acting travel kicks formed brass bushings clear of the die nest on each press cycle, with bumper pads taking the shock at the end of the 100 mm kick.
Diverter gate on a bottling conveyor
About 20 kg of vertical lifting capacity with margin flips a deflector arm between two lanes, and the riveted round body survives the periodic hose-down the filler area gets.
Is the Airtac B01-MA Special Cylinder B01-MA32X100SCA the Right Cylinder?
When a 25 mm MA falls short of the job with its 245 N push at 0.5 MPa, this 32 mm size almost doubles the output; if loads keep growing toward 628 N, the 40 mm bore is the next step. Remember the piston simply drifts once the valve centres or supply pressure drops, so add a pilot check valve or rod lock wherever the load must stay parked. The CA code here specifies a pivoting back cover, and FA flange, LB foot or SDB bracket options cover fixed-base installations; the magnet comes built in as standard, so CMSG, DMSG and EMSG switches clamp on without any special piston order. At the 100 mm stroke, keep side loads off the rod and guide the workpiece externally to protect the 12 mm shaft.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MA Special Cylinder B01-MA32X100SCA FAQ
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N; at 0.7 MPa the figures rise to 563.0 N push and 483.8 N pull, with a theoretical maximum of 82 kgf at 1.0 MPa. Feed it air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) and rod speed can run anywhere from 30-800 mm/s.
Yes - the magnet sits in the piston as standard equipment on every MA series unit, so CMSG, DMSG or EMSG switches clamp straight onto the barrel for end-of-stroke or mid-stroke signalling. No special-order piston or factory fit-out is needed, and the CA pivot back cover lets the rod eye swing with linkages while the sensor still reads position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MA Special Cylinder B01-MA32X100SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.