Airtac B01-MA Special Cylinder B01-MA32X50SCA
The AirTAC Airtac B01-MA Special Cylinder B01-MA32X50SCA is a genuine double acting standard round-body mini air cylinder with a Ø0mm bore and 50mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ0 mm
- Stroke50 mm
- Port sizePT/G
- Acting typeDouble acting
- Rod thread
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MA Special Cylinder B01-MA32X50SCA
A pivot-ready 32 mm bore driving a 50 mm stroke, the MA32X50-S-CA runs double acting on filtered air between 0.15-1.0 MPa (22-145 psi) and pushes 402.2 N at 0.5 MPa. Fixed bumper pads soften the impact at each end of travel, and the CA pivot back cover lets the body swing in a linkage with no extra bracket work. The magnet comes built in as standard, so CMSG / DMSG / EMSG switches drop straight on for end-of-stroke signals. For real work, plan on about 241 N rather than the full 402.2 N rating at 0.5 MPa - that margin absorbs seal drag and supply dips. Held vertically, the same figure equals a lift of roughly 41 kg at full rating, or 20 kg with a 2:1 margin, which makes matching part weights straightforward. The riveted stainless round barrel and hard-chrome plated 12 mm carbon-steel rod resist washdown and humid shop air far better than painted mini cylinders, and travel speed spans 30-800 mm/s.
Airtac B01-MA Special Cylinder B01-MA32X50SCA Technical Specifications
| Model | Airtac B01-MA Special Cylinder B01-MA32X50SCA |
|---|---|
| Series | MA mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MA Special Cylinder B01-MA32X50SCA
| MA | Standard round-body mini cylinder (double-acting). |
|---|---|
| 0 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B01-MA Special Cylinder B01-MA32X50SCA Is Used
Bench-top bushing press
The 402 N push at 0.5 MPa seats small bushings and dowels into aluminium housings on an assembly bench, with the CA pivot letting the cylinder follow a tilting press arm.
Diverter gate on a packaging conveyor
Mounted through its pivot back cover, the 50 mm stroke swings a sorting gate between two lanes; the standard magnet triggers a CMSG switch to confirm each gate position.
Lid clamp on a filling machine
Roughly 241 N of practical clamping force holds plastic container lids during dosing, and the stainless barrel stands up to frequent wipe-downs around the filler head.
Is the Airtac B01-MA Special Cylinder B01-MA32X50SCA the Right Cylinder?
At 402.2 N push and 345.6 N pull on 0.5 MPa, this bore suits light clamping and short transfer strokes; drop to a 25 mm bore (245.3 N push) for tighter frames or move up to 40 mm (628.3 N) when loads grow. Like any double-acting cylinder, the rod drifts once air is vented, so fit a rod lock or pilot check valve wherever a position must be kept. Ports are 1/8" with an M10x1.25 male rod thread; combine the CA pivot cover with an SDB pivot bracket, or specify FA flange or LB foot mounts instead if the frame is fixed. Proof pressure is 1.5 MPa (215 psi).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MA Special Cylinder B01-MA32X50SCA FAQ
At 0.5 MPa the 32 mm bore pushes 402.2 N and pulls 345.6 N. At 0.7 MPa those rise to 563.0 N push and 483.8 N pull, and the theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure.
The CA pivot back cover gives the round stainless body an integrated pivot eye, so it swings freely in linkages and gate arms without add-on clevis brackets. The construction itself is a riveted stainless-steel barrel with a hard-chrome plated rod, suited to damp and washdown-prone areas, and the built-in magnet works with CMSG, DMSG and EMSG switches as standard.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MA Special Cylinder B01-MA32X50SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.