verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDA Series · Compact Cylinder

Airtac B01-SDA Dedicated Cylinder B01-SDA80X50SB

The AirTAC B01-SDA Dedicated Cylinder B01-SDA80X50SB is a genuine double-acting COMPACT (thin) air cylinder with a Ø80mm bore and 50mm stroke, PT3/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.

  • BoreØ80 mm
  • Stroke50 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM14×1.5 (F) / M22×1.5 (B)
  • CushionFixed NBR bumper (both ends)
$103.25 $110.75Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac B01-SDA Dedicated Cylinder B01-SDA80X50SB

The AirTAC B01-SDA80X50SB is a double-acting single-rod compact cylinder delivering 2513.3 N of push force at 0.5 MPa. The B01- prefix marks this as an application-dedicated variant of the base SDA80X50SB, retaining exact mechanical parity with the standard line. Its short riveted body drastically reduces axial mounting depth compared to round-body units, saving valuable machine footprint.

This specific build includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. It also features a male-thread piston rod end (-B) sized at M22x1.5 for secure load coupling. End-stopping relies on a fixed NBR bumper to decelerate the stroke, not an adjustable air cushion.

Airtac B01-SDA Dedicated Cylinder B01-SDA80X50SB Technical Specifications

ModelAirtac B01-SDA Dedicated Cylinder B01-SDA80X50SB
SeriesSDA compact (thin) cylinder
Bore sizeØ80 mm
Stroke50 mm
Acting typeDouble acting
Port sizePT3/8
Rod end threadM14×1.5 female / M22×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)
Max standard strokeUp to 120 mm

Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2513 N2268 N
0.7 MPa3519 N—
Max (@1.0 MPa)513 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA80X50SB

SDACompact (thin) double-acting cylinder series.
80Bore size in mm.
×50Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).

Where the Airtac B01-SDA Dedicated Cylinder B01-SDA80X50SB Is Used

straighten

Injection Mold Ejection

Provides robust 2513.3 N push force to eject heavy plastic parts from injection molds, where the short riveted body minimizes press footprint.

vertical_align_center

Pallet Lifter Actuation

Drives vertical lifting platforms in packaging lines, utilizing the male M22x1.5 rod thread for secure heavy-load coupling and a 128.1 kg safe vertical lift capacity.

factory

Press Tooling Strike

Executes short 50 mm stamping or pressing actions in automated assembly cells, relying on fixed NBR bumpers to absorb end-stop energy.

Is the Airtac B01-SDA Dedicated Cylinder B01-SDA80X50SB the Right Cylinder?

When sizing this 80 mm bore, step down to the SDA63 which provides 1558.6 N push at 0.5 MPa, or step up to the SDA100 yielding 3927 N at 0.5 MPa. To order, confirm the 50 mm stroke, PT3/8 port, male M22x1.5 rod, and the required magnetic sensor. Note that a plain compact cylinder drifts if air pressure is lost; holding a suspended load requires an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac B01-SDA Dedicated Cylinder B01-SDA80X50SB FAQ

This 80 mm bore double-acting cylinder generates 2513.3 N push and 2267.8 N pull at 0.5 MPa. At 0.7 MPa it yields 3518.6 N push and 3175 N pull. The theoretical maximum push is 513 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa with a speed range of 30-500 mm/s.

The B01- prefix designates an application-dedicated, customer-specified variant of the standard SDA80X50SB, meaning it is mechanically identical to the base cylinder. It does not have adjustable air cushions; instead, a fixed NBR bumper at each end decelerates the piston near stroke end. For high-energy cycles, add an external shock absorber.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDA Compact Cylinders

Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA80X50SB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for B01-SDA80X50SB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.