Airtac B01-SDA Dedicated Cylinder B01-SDA80X60
The AirTAC Airtac B01-SDA Dedicated Cylinder B01-SDA80X60 is a genuine double-acting COMPACT (thin) air cylinder with a Ø80mm bore and 60mm stroke, PT3/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ80 mm
- Stroke60 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM14×1.5 (F) / M22×1.5 (B)
- CushionFixed NBR bumper (both ends)
About the Airtac B01-SDA Dedicated Cylinder B01-SDA80X60
The AirTAC B01-SDA80X60 is a double-acting single-rod compact cylinder. The leading "B01-" prefix marks this as an application-dedicated (customer-specified) variant of the base SDA80X60, meaning it is mechanically identical to the standard line but grouped for specific customer builds. It delivers a robust 2513.3 N push and 2267.8 N pull at 0.5 MPa, operating within a 0.15-1.0 MPa pressure range.
Designed to save axial mounting depth, the short riveted body fits where round-body or profile cylinders cannot. This 80 mm bore unit features a 25 mm piston rod, PT3/8 air ports, and a female M14x1.5 rod-end thread. It relies on a fixed NBR bumper at each end to decelerate the stroke end rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet and therefore cannot support magnetic sensing.
Airtac B01-SDA Dedicated Cylinder B01-SDA80X60 Technical Specifications
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA80X60 |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M14×1.5 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA80X60
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDA Dedicated Cylinder B01-SDA80X60 Is Used
Injection Mold Ejection
Provides the 2513.3 N extend force needed to push heavy plastic parts out of injection molding tools, utilizing the 60 mm stroke to clear the mold cavity safely.
Press Tool Clamping
Secures stamping dies and workholding fixtures in automated press lines, where the short riveted body minimizes axial footprint and the fixed NBR bumper absorbs end-stop impact.
Pallet Lifting Stops
Acts as a heavy-duty pop-up stopper in conveyor systems to halt 128 kg pallets, relying on the 25 mm piston rod to handle the high side-load resistance of decelerating goods.
Is the Airtac B01-SDA Dedicated Cylinder B01-SDA80X60 the Right Cylinder?
When sizing this actuator, step down to the SDA63 which provides 1558.6 N push at 0.5 MPa, or step up to the SDA100 which yields 3927 N push at 0.5 MPa. Based on the 2513.3 N push figure at 0.5 MPa, the safe working load is approximately 1508 N (about 60 percent of capacity), translating to a vertical lift capability of roughly 128.1 kg with a 2:1 safety margin. To confirm your ordering essentials for this application-dedicated variant: specify the 80 mm bore, 60 mm stroke, PT3/8 port, female M14x1.5 rod thread, and no magnet. A plain compact cylinder like this does not hold its load if air pressure is lost or the valve is centered; the piston will drift, and the fixed bumper only decelerates it near the stroke end. For applications requiring a held load, an external rod lock or a pilot-operated check valve is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDA Dedicated Cylinder B01-SDA80X60 FAQ
This 80 mm bore double-acting cylinder provides 2513.3 N push and 2267.8 N pull at 0.5 MPa, and 3518.6 N push at 0.7 MPa. The theoretical maximum push force is 513 kgf at 1.0 MPa. It operates at speeds between 30-500 mm/s, with a maximum operating pressure of 1.0 MPa and a proof pressure of 1.5 MPa.
The B01- prefix indicates an application-dedicated (customer-specified) variant of the standard SDA80X60, sharing the exact same mechanical specifications. It does not have an adjustable air cushion; instead, it uses a fixed NBR bumper at each end to decelerate the stroke. For high-speed or high-energy cycles, you should add an external shock absorber or slow the approach speed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA80X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.