This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement B04-SAUD100X125S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.

The AirTAC B04-SUD Construction Machinery Special Standard Cylinder B04-SUD100X125S is a double-acting profile-type standard cylinder with a Ø100mm bore and 125mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B04-SAUD100X125S, which matches its bore, stroke, force and mounting.
The AirTAC B04-SUD100X125S is a discontinued double-acting double-rod profile cylinder. The B04- prefix marks this as the construction-machinery dedicated variant of the SUD100X125S, mechanically identical to the base model with a 100mm bore, 125mm stroke, and 1/2" port. A rod exits both ends on one piston, meaning both faces use the rod-side area and push and pull force are equal both ways (3681N at 0.5MPa). It is replaced by the direct replacement SAUD100X125S, which retains the exact bore, stroke, force, port, and FA/LB mounting.
Because the second rod drives a sensor cam and resists rotation, double-rod architecture is ideal for heavy-equipment builders. The legacy CS1-B/DS1-B sensors on this SUD are superseded by CMSG/DMSG/EMSG switches on the SAUD. Note that the air cushion only decelerates near stroke end; an external rod lock is required to hold loads.
| Model | Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD100X125S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | B04-SAUD100X125S |
| Bore size | Ø100 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The B04-SAUD100X125S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B04-SAUD100X125S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Synchronizes dual-tool actuation on heavy machinery arms where equal push and pull force is mandatory for balanced lifting.
Provides anti-rotation stability for gripping heavy materials, using the back rod to carry a sensor cam for position feedback.
Drives compact profile assemblies in road construction machinery, fitting tight spaces while delivering 3681N of equal force.
To replace the B04-SUD100X125S, order the direct replacement SAUD100X125S, keeping the bore, stroke, and FA/LB mounting identical. When sizing both ways, verify that the equal push/pull force of 3681N at 0.5MPa meets your load, or step to a neighbouring bore if more capacity is needed. A double rod is right when you need anti-rotation or must drive two tools simultaneously. If your SUD used the -S magnet, upgrade the legacy CS1-B/DS1-B switches to current CMSG/DMSG/EMSG sensors. For strokes of 300mm or longer, carefully manage side-load alignment to prevent guide wear.
Replacement checklist
Yes, this construction-machinery dedicated variant of the SUD100X125S is discontinued. The direct replacement is the SAUD100X125S, which matches the bore, stroke, 1/2" port, and equal both ways force. The B04- prefix is an industry designation only and does not change physical specs.
The 100mm bore has a 1/2" port and generates equal force both ways: 3681N at 0.5MPa, 5153N at 0.7MPa, and 6626N at 0.9MPa. Because it is double-rod, the push and pull values are identical.
Send us the quantity and destination. We confirm price, availability and lead time on the B04-SAUD100X125S replacement — usually within 7 hours.