verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC SAU Series · Profile-Type Cylinder

Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X125S

The AirTAC B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X125S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 125mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.

  • BoreØ100 mm
  • Stroke125 mm
  • Port size1/2"
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$185.14 $192.64Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X125S

The B04-SAUD100X125S is an AirTAC double-acting, double-rod profile cylinder. The B04- prefix marks this as the construction-machinery dedicated variant of the SAUD100X125S, mechanically identical to the base model. A rod exits both ends on one piston, meaning both faces use the rod-side area. Output force is equal in both directions, delivering 3681 N each way at 0.5 MPa. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.

This 100mm bore unit uses a 1/2 inch port and a 25mm rod. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG switches. A Viton H seal option raises the operating temperature limit from 70 C to 150 C for harsh heavy-equipment environments.

Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X125S Technical Specifications

ModelAirtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X125S
SeriesSAU profile-type cylinder
Bore sizeØ100 mm
Stroke125 mm
Acting typeDouble acting
Port size1/2"
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X125S

SAUProfile-type standard cylinder series.
100Bore size in mm.
×125Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.

Where the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X125S Is Used

construction

Excavator Panel Pusher

Drives heavy cab panels with equal push and pull force, using the back rod to trip a limit switch.

precision_manufacturing

Twin-Tool Synchronized Actuator

Carries two opposing tools on a single piston for synchronized material processing tasks.

forklift

Crane Load Aligner

Provides non-rotating anti-twist guidance for positioning heavy structural beams.

Is the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X125S the Right Cylinder?

When sizing this double-rod cylinder, compare both ways: stepping down to the 63mm bore yields 1402 N at 0.5 MPa, while the 80mm bore provides 2268 N. The 100mm bore chosen here outputs 3681 N. Choose a double-rod configuration when your application demands anti-rotation guidance, synchronized twin tooling, or needs a back rod to carry a sensor cam. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. At 125mm stroke, side loads are minimal, but external guides should always support the load. A plain cylinder does not hold load without live air; the cushion only decelerates. Use an external rod lock or pilot-operated check valve for secure load holding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X125S FAQ

This 100mm bore cylinder features a 1/2 inch port and a 25mm rod. Because it is a double-rod design, the force is equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The B04- prefix simply denotes the construction-machinery dedicated variant, with no mechanical changes to the specs.

The -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG, or EMSG electronic or reed switches directly onto the profile barrel for position sensing. A plain no-S SKU cannot take a sensor.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAU Cylinders

Request a Quote for Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X125S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for B04-SAUD100X125S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.