Airtac B05-MAL Robot-Dedicated Pneumatic Cylinder B05-MAL25X75S
AirTAC B05-MAL25X75S Robotic Arm Cylinder Specifications
- Series: B05-MAL Mechanical Hand Special Series
- Bore size: Ø25mm
- Stroke: 75mm (adjustable cushioning)
- Operating pressure: 0.05-0.9 MPa
- Ambient temperature: -10℃ to 70℃
- Piston speed: 50-800 mm/s
- Mounting type: Front flange with precision alignment pins
- Rod end: Female M10x1.25 thread
- Port size: M5x0.8 (dual ports for front/rear chambers)
- Seal material: Heat-resistant NBR (Nitrile Butadiene Rubber)
- Tube material: Aluminum alloy hard anodized
- Rod material: Chrome-plated steel (Cr-Mo)
- Weight: 0.98 kg ±2%
- Dimensions: 150mm(L) × 42mm(W) × 42mm(H) (excluding rod extension)
- Position detection: Optional magnetic sensor groove (4mm wide)
- Repeat positioning accuracy: ±0.2mm
Compact robotic cylinder optimized for multi-axis manipulators, featuring reduced inertial mass and anti-rotation design. The dual-port configuration enables rapid air exchange for high-speed gripping operations. Precision ground rod and low-friction seals ensure smooth motion repeatability in cleanroom environments.
- SCARA robot end-of-arm tooling (EOAT)
- PCB handling in electronics assembly lines
- Precision parts sorting systems
- Automated optical inspection (AOI) positioning
- Pharmaceutical vial handling systems
Installation guidelines:
Use alignment pins for coaxial mounting with robotic joints. Lubricate with ISO VG32 turbine oil during initial setup.
For vertical installations, install an air dryer to prevent condensation accumulation in lower chamber.
| Property | Property Value |
|---|---|
| sku | B05-MAL25X75S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.