Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI50X175S
AirTAC B06-SAI50X175S Battery-Optimized ISO Cylinder Specifications
- Full model: B06-SAI50X175S
- Standard: ISO 6431 compliant
- Bore size: Ø50mm (precise 50.4mm actual)
- Stroke: 175mm (±1.5mm tolerance)
- Operating pressure: 0.05–1.0 MPa
- Temperature range: -20℃ to 80℃ (continuous operation)
- Port size: G1/8 (EN 10226 compliant)
- Cushioning: Adjustable rubber buffer (both ends)
- Piston material: Anodized aluminum alloy (hard coat 0.02-0.03mm)
- Rod material: Chrome-plated steel (Cr layer ≥15μm)
- Seal type: NBR + PU hybrid seals
- Repeat accuracy: ±0.5mm
- Weight: 1.85kg (excluding accessories)
- Dimensions:
- Total length: 275mm (stroke + cylinder body)
- Body diameter: Ø63mm (max cross-section)
- Mounting height: 22mm (per ISO 6431)
- Rod thread: M10×1.25 (male thread)
- Lubrication: Pre-lubed (Grease PG-9 equivalent)
- IP rating: IP54 (standard), IP67 optional
Specialized pneumatic cylinder engineered for battery manufacturing environments, featuring enhanced corrosion resistance against electrolyte exposure. The SAI series incorporates dual-seal technology with front wiper seals to prevent particulate ingress in cleanroom applications. Requires 5-40μm filtered dry air.
- Lithium battery cell stacking machines
- Battery terminal welding fixtures
- EV battery module assembly lines
- Electrolyte filling station actuators
- Battery formation equipment pushers
Installation protocol:
Mount using ISO 6431-compliant brackets only. Allow 20mm clearance
for rod extension and install moisture trap within 1m of inlet port.
Cycle rate ≤60cpm for optimal seal life.
| Property | Property Value |
|---|---|
| sku | B06-SAI50X175S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.