Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI50X710S
AirTAC B06-SAI50X710S Battery-Optimized ISO Standard Cylinder
- Model: B06-SAI50X710S
- Series: Battery-optimized ISO 15552 compliant
- Bore size: 50mm
- Stroke: 710mm
- Operating pressure: 0.05–1.0 MPa (ultra-low start pressure)
- Cushioning: Adjustable pneumatic cushion + elastic stopper
- Rod thread: M16×1.5
- Port size: G1/8 (NPT1/8 optional)
- Ambient temperature: -20℃ to 80℃
- Piston speed: 50–800 mm/s
- Seal material: Heat-resistant NBR (Nitrile)
- Body material: Anodized aluminum alloy (A6063)
- Mounting: ISO 15552 standard (8-M6 mounting holes)
- Weight: 3.2kg (excluding rod extension)
- Dimensions: 900mm(L) × 62mm(W) × 62mm(H)
- Protection rating: IP67 (wipers included)
- Position detection: Pre-installed magnet (SM/SMF series sensors compatible)
Engineered for battery-powered automation systems, this ISO cylinder features 35% reduced friction resistance compared to standard models. The optimized sealing structure minimizes air consumption while maintaining 500km+ service life. Special anti-corrosion treatment on rod surface (SUJ2 steel) ensures reliability in humid environments.
- Mobile battery-operated assembly robots
- Automated warehouse vertical lift systems
- EV battery module handling equipment
- Solar-powered agricultural actuators
- Portable medical device mechanisms
Installation protocol:
Lubricate with ISO VG32 hydraulic oil before initial use.
Maintain ≥2mm lateral clearance during mounting.
For vertical installations, use rod-down orientation to prevent seal wear.
Avoid environments with:
Salt spray concentrations >20mg/m³,
Particle contamination >0.1mg/m³,
High-frequency vibration >50Hz
| Property | Property Value |
|---|---|
| sku | B06-SAI50X710S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.