Airtac B06-SAU Battery Dedicated Standard Cylinder Series B06-SAU32X500
AirTAC B06-SAU32X500 Battery-Optimized Standard Cylinder Specifications
- Model: B06-SAU32X500
- Bore size: 32mm
- Stroke: 500mm
- Operating pressure: 0.05–1.0 MPa
- Cushioning type: Adjustable rubber cushion (both ends)
- Ambient temperature: -20℃ to 80℃
- Port thread: M5x0.8 (standard), G1/8 optional
- Cylinder material: Aluminum alloy (anodized surface)
- Piston rod material: Stainless steel SUS304
- Seal material: NBR (nitrile rubber) with wear-resistant coating
- Rod end type: Female thread M10x1.25
- Weight: 2.85kg (without accessories)
- Dimensions: 655mm(L) × 48mm(W) × 48mm(H) (fully retracted)
- Max speed: 500-800mm/s (with cushion adjustment)
- Protection rating: IP54 (standard), IP67 optional
- Lubrication: Pre-lubricated (maintenance-free for 2,000km)
Specialized pneumatic cylinder engineered for battery manufacturing environments, featuring enhanced corrosion resistance against acidic vapors and optimized sealing for minimal particulate generation. The double-acting design incorporates a chromium-plated piston rod with integrated scraper to prevent electrolyte contamination. Requires 5μm filtered air with oil mist lubrication recommended for extended service life.
- Lithium-ion battery cell stacking mechanisms
- Electrolyte filling station actuators
- Battery terminal welding positioners
- Automated battery pack compression systems
- EV battery module handling robots
Installation protocol:
Mount using reinforced side brackets (torque ≤58.8N·m). Maintain ≥3mm alignment tolerance
during parallel cylinder arrangements. Post-installation: Perform 50-100 low-pressure
cycles (≤0.1MPa) to seat seals before full operation.
Chemical exposure limits:
Compatible with diluted sulfuric acid (≤10% concentration) and lithium salts.
Not recommended for direct contact with organic solvents or strong alkalis.
| Property | Property Value |
|---|---|
| sku | B06-SAU32X500 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.