Airtac B52-GL Copper-Free Air Treatment Unit B52-GL200C06J
The AirTAC Airtac B52-GL Copper-Free Air Treatment Unit B52-GL200C06J is a genuine G-series air lubricator. It meters an oil mist into the compressed-air line so cylinders, valves and air tools downstream stay lubricated, with See datasheet ports and a pc oil bowl. A lubricator does not filter or regulate — it goes last in the line, after the filter and the regulator.
- TypeAir lubricator
- Port sizeSee datasheet
- Inlet pressure0.05 - 1.0 MPa
- Oil bowlPC
- ThreadPT
- BracketMounting bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GL Copper-Free Air Treatment Unit B52-GL200C06J
The GL200C06J is an AirTAC G-series air lubricator: its only job is to add a controlled oil mist to the compressed air line so downstream cylinders, valves and air tools stay lubricated. It does not filter the air and it does not regulate pressure. This size 200 unit has a PT 1/8 in port, and the J suffix means it is supplied without a mounting bracket - the right choice when you panel-mount the unit or bolt it into an existing assembly. The bowl on this size is polycarbonate (PC). Max working pressure is 1.0 MPa (145 psi), working temperature -5 to 70 C (non-freezing), medium compressed air only.
This is a genuine AirTAC part, sold by an authorised distributor. The G-series lubricator range runs from size 200 to 600 with larger ports and increasing flow as the size number rises, and PT (standard), G or NPT thread options to order. Flow is published as curves rather than a single rated number, so we confirm the exact datasheet and flow data for your application on request.
Airtac B52-GL Copper-Free Air Treatment Unit B52-GL200C06J Technical Specifications
| Model | Airtac B52-GL Copper-Free Air Treatment Unit B52-GL200C06J |
|---|---|
| Series | GL200 air lubricator |
| Port size | See datasheet (PT thread) |
| Oil bowl material | PC |
| Bracket | Mounting bracket included |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.05 - 1.0 MPa (7 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Function | Oil-mist lubrication only |
Specifications follow the official AirTAC G-series air-preparation data. A lubricator has no drain, no regulating mechanism, no gauge and no filter element, so none of those figures apply. Oil grade, bowl capacity, flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GL Copper-Free Air Treatment Unit B52-GL200C06J
| GL200 | G-series air lubricator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Mounting bracket included. A bracket ships by default; J orders it without. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
The lubricator has the shortest code of the six G-series subfamilies — size, port, bracket, thread. There is no drain, pressure-type, gauge or filtering-grade position. Example: GL300-10JG is a 300 body, PT3/8", no bracket, G (BSPP) thread.
Size Class
- GL200PT1/8" - PT1/4"
- GL300PT1/4" - PT1/2"
- GL400PT3/8" - PT1/2"
- GL600PT3/4" - PT1"
A larger body carries a larger port and passes more air. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GL600 uses an aluminium-alloy oil bowl; the 200, 300 and 400 bodies use PC.
| This model | GL200 · See datasheet |
|---|---|
| One size up | GL300 |
| Line order | Filter first, then regulator, lubricator last |
Where the Airtac B52-GL Copper-Free Air Treatment Unit B52-GL200C06J Is Used
Panel-mounted feed for CNC fixture clamps
Bolted directly into a machine control cabinet or manifold plate, the bracketless GL200C06J meters oil mist into the 1/8 in line feeding pneumatic clamps on a CNC fixture, keeping seal faces lubricated.
Point-of-use oiling for air nailers on a trim line
Installed at the drop ahead of pneumatic nailers and staplers on a woodworking trim line, it feeds a fine oil mist into the compact 1/8 in supply so driver blades and O-rings last longer.
Lubrication drop for lab automation cylinders
Fitted inline on a small-bore supply feeding the mini cylinders of a laboratory automation station, the PC-bowl lubricator keeps actuator seals conditioned while mounting is handled by the customer's own panel fixture.
Is the Airtac B52-GL Copper-Free Air Treatment Unit B52-GL200C06J the Right Lubricator?
Choose the size step by port and flow: GL200 is the compact entry size (here PT 1/8 in), with GL300, GL400 and GL600 stepping up in port and flow. Since this J version ships without a mounting bracket, specify it only when the unit is panel-mounted or supported by your own fixture; otherwise order the standard GL200C06, which includes a bracket. Thread is PT as standard, with G (BSPP) and NPT available to order. Flow for the series is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Downstream equipment actually needs oil
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
- ✓ Bowl material: PC, or aluminium on GL600
- ✓ Fit after the filter and regulator
Installation & Maintenance Notes
- check Fit last in the line: filter, then regulator, then lubricator.
- check Mount vertically, bowl down, following the airflow arrow.
- check Keep inlet pressure within 0.05 - 1.0 MPa.
- check Use only oil approved for pneumatic lubricators.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Check the oil level regularly; top up before it runs dry.
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The oil mist travels downstream, so if any branch of the line must stay oil-free, take that branch off before the lubricator. We will confirm the recommended oil grade from the factory datasheet on request.
Airtac B52-GL Copper-Free Air Treatment Unit B52-GL200C06J FAQ
AirTAC publishes GL-series flow as performance curves rather than a single rated figure, so we do not quote a stand-alone number. Send us your working pressure and the demand of the tools or cylinders downstream, and we will confirm the correct size against the datasheet on request before you order.
The J suffix only affects mounting: the GL200C06J is supplied without a mounting bracket, whereas the standard GL200C06 includes one. The lubrication function, size 200 body, PC bowl and PT 1/8 in port are identical, so pick based on how you plan to mount the unit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GL Copper-Free Air Treatment Unit B52-GL200C06J
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.