Airtac GAC F.R.L. Unit GAC20006AS
The AirTAC Airtac GAC F.R.L. Unit GAC20006AS is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialPC
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC20006AS
Delivering cleaned, regulated and lubricated air for single actuators, the AirTAC GAC20006AS is a complete F.R.L. combination pairing a filter, regulator and lubricator on one L-shape bracket. The 1/8in port feeds a standard pressure range of 0.15-0.9 MPa (20-130 psi) through a 40 um element. An automatic drain clears condensate from the 25 cc bowl without operator intervention.
The pre-plumbed assembly eliminates inter-unit tubing, reducing leak paths during installation. A circular gauge is fitted, reading MPa/psi for the default PT thread so operators can verify the set pressure directly. If a line must stay oil-free, choose a filter-regulator instead because this lubricator adds oil mist downstream of the regulator seat.
Airtac GAC F.R.L. Unit GAC20006AS Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC20006AS |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC20006AS
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC20006AS Is Used
Single Actuator Tools
Feeds individual pneumatic staplers or small air nailing jigs requiring a steady 1/8in supply and fine oil mist.
Lab Automation
Conditions air for compact benchtop pick-and-place mechanisms where the 25 cc drain bowl and automatic condensate ejector prevent moisture ingress.
Micro Clamping Fixtures
Regulates downstream pressure for delicate machining clamps, ensuring the 40 um filter captures grit before it reaches small bore cylinders.
Is the Airtac GAC F.R.L. Unit GAC20006AS the Right Air-Prep Unit?
This 750 g unit suits small jigs and single-tool duties rather than main plant headers. The PC bowl handles standard 1.0 MPa (145 psi) max pressures, while the automatic drain suits unattended or wet lines. If you need finer protection for precision valves, step up to the 5 um W element. For larger demands, the GAC300 offers a 60 cc drain bowl and a flow curve plotted to 3000 L/min at 0.7 MPa inlet versus the 1750 L/min envelope of this body. Replacement spares are GAF200-06, GAR200-06 and GAL200-06. Because the 1.0 MPa maximum supply leaves only about 0.1 MPa of headroom above the 0.9 MPa standard setting, plan inlet pressure carefully if you need full output.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC20006AS FAQ
The standard pressure range is 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 750 g, uses a 25 cc drain bowl and a 36 cc oil bowl, and requires ISO VG 32 lubricant.
The A in the model code specifies an automatic drain that ejects condensate from the 25 cc bowl without an operator. This differs from the default semi-auto and manual drain pair, making it better suited for unattended stations or environments with high moisture loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC20006AS
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.