Airtac GAC F.R.L. Unit GAC20006LK
The AirTAC Airtac GAC F.R.L. Unit GAC20006LK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialPC
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC20006LK
Delivering cleaned, regulated and lubricated air for single actuators, this AirTAC GAC20006LK combines a filter, regulator and lubricator on one L-shape bracket. The 1/8in port feeds a lower-pressure circuit operating between 0.15-0.4 MPa (20-58 psi), trapping 40 um particles before the oil mist is added downstream of the regulator seat. A circular gauge reading MPa/psi is fitted for the default PT thread.
Weighing 750 g, the assembly carries a 25 cc condensate bowl and a 36 cc oil reservoir. This model includes a reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol with details on its own page. The semi-auto and manual drain pair is fitted, and the unit is rated for -5 to 70 C using ISO VG 32 lubricant.
Airtac GAC F.R.L. Unit GAC20006LK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC20006LK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC20006LK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC20006LK Is Used
Small Pneumatic Jigs
Feeds individual actuators on benchtop assembly jigs where a 1/8in port and a 36 cc oil bowl provide sufficient capacity for light, intermittent duty.
Lab Air Lines
Conditions supply air for laboratory test fixtures requiring stable low-pressure outputs between 0.15 and 0.4 MPa without over-pressurizing delicate instruments.
Benchtop Tooling
Prepares air for small handheld pneumatic tools by adding a controlled oil mist downstream of the regulator to keep internal moving parts lubricated.
Is the Airtac GAC F.R.L. Unit GAC20006LK the Right Air-Prep Unit?
Choose this 1/8in body for small jigs where space is tight, stepping up to the GAC300 if you need a larger 60 cc drain bowl or a flow envelope plotted to 3000 L/min at 0.7 MPa inlet. The PC bowl suits general machinery at the standard 1.0 MPa maximum, while the lower-pressure type caps the outlet at 0.4 MPa. If the downstream line must stay oil-free, choose a filter-regulator instead of this lubricated assembly. Replacement spares share the 200-06 suffix: GAF200-06, GAR200-06 and GAL200-06. The 0.4 MPa upper limit is 44% of the standard 0.9 MPa ceiling.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC20006LK FAQ
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 750 g, has a 25 cc drain bowl and a 36 cc oil bowl, and uses ISO VG 32 lubricant.
The K indicates a reverse-flow (reflux) valve is fitted. The AirTAC catalogue draws this as a separate pneumatic symbol on its own page, and no functional details are provided in our source data.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC20006LK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.