Airtac GAC F.R.L. Unit GAC20006LNK
The AirTAC Airtac GAC F.R.L. Unit GAC20006LNK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialPC
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC20006LNK
Delivering cleaned, regulated and lubricated air for light-duty pneumatics, this GAC20006LNK combination integrates a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/8in port serves small actuators, while the lower-pressure type restricts the operating band to 0.15-0.4 MPa (20-58 psi). A 40 um element captures particulates before the regulator, ensuring the internal seat stays clean.
Because the letter N follows the port code, no pressure gauge is supplied from the factory; operators can add one via the 1/8in gauge connection. This specific assembly carries the reverse-flow (reflux) valve, which the catalogue depicts as a separate pneumatic symbol with details on its own page. Condensate empties through a paired semi-auto and manual drain into a 25 cc bowl, and the unit weighs 750 g.
Airtac GAC F.R.L. Unit GAC20006LNK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC20006LNK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC20006LNK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC20006LNK Is Used
Micro-Assembly Jigs
Feeds low-force grippers handling delicate electronics where a maximum 0.4 MPa output prevents crushing components.
Laboratory Air Tools
Conditions supply for benchtop test fixtures requiring a steady, lower-pressure air source with added lubrication.
Small Instrumentation
Prepares air for sensitive pneumatic gauges and low-pressure cylinders that cannot tolerate standard 0.9 MPa outputs.
Is the Airtac GAC F.R.L. Unit GAC20006LNK the Right Air-Prep Unit?
Choose this 750 g assembly for single actuators where space is tight, stepping up to the GAC300 if you need a larger 60 cc condensate bowl. The PC bowl is standard for general environments, while the semi-auto and manual drain pair dumps water on every pressure drop or on demand. Since this is the lower-pressure type, the regulator tops out at 0.4 MPa, making it the wrong part if the machine might ever need higher force. Remember that oil mist is added downstream of the regulator, so choose a filter-regulator instead if the line must stay oil-free. Replacement spares share the exact same body and port suffix: GAF200-06, GAR200-06 and GAL200-06. Note that 0.4 MPa is about 44% of the Standard type's 0.9 MPa ceiling, quantifying exactly what the buyer gives up when choosing this lower-pressure variant.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC20006LNK FAQ
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 750 g, features a 25 cc drain bowl and a 36 cc oil bowl, and uses ISO VG 32 lubricant.
The N after the port means no gauge is supplied, though a 1/8in connection exists to fit one later. The K indicates a reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue, with details on its own page.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC20006LNK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.