Airtac GAC F.R.L. Unit GAC200C06ASK
The AirTAC Airtac GAC F.R.L. Unit GAC200C06ASK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06ASK
Configured with a 1/8in port, this AirTAC GAC200C06ASK delivers cleaned, regulated and lubricated air straight from a single bracket. The metal bowl houses a 40 um filter element, while the standard pressure type operates from 0.15-0.9 MPa (20-130 psi). A fitted circular gauge reads in MPa and psi for the default PT thread, and the automatic drain clears condensate without an operator.
Weighing 750 g, the assembly combines a filter, regulator and lubricator pre-plumbed in sequence so oil mist is added downstream of the regulator seat. The reverse-flow valve is fitted, shown as a separate pneumatic symbol in the catalogue. Spares follow the body-port suffix: GAF200-06, GAR200-06 and GAL200-06.
Airtac GAC F.R.L. Unit GAC200C06ASK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06ASK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC200C06ASK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06ASK Is Used
Miniature Pneumatic Jigs
Feeds clean, lubricated air at a stable pressure to small precision jigs and clamping fixtures operating on 1/8in supply lines.
Single Actuator Stations
Conditions air for individual pneumatic cylinders or small tools where a 750 g compact assembly is preferred over a large header unit.
Laboratory Air Prep
Prepares instrument air for benchtop equipment, using the automatic drain to empty the 25 cc condensate bowl without manual intervention.
Is the Airtac GAC F.R.L. Unit GAC200C06ASK the Right Air-Prep Unit?
This 1/8in unit suits small jigs or single actuators, with a flow curve plotted to 1750 L/min at 0.7 MPa inlet. Stepping up to the GAC300 body shifts that envelope to 3000 L/min and increases the drain bowl from 25 cc to 60 cc. The metal bowl offers a robust build for general environments, and the 40 um element balances protection with service life. If the downstream line must stay oil-free, choose a filter-regulator instead of this lubricated assembly. The standard type tops out at 0.9 MPa, but because the maximum supply is 1.0 MPa, there is only about 0.1 MPa of regulation headroom above the highest setting.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06ASK FAQ
This standard type operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 25 cc drain bowl, a 36 cc oil bowl, uses ISO VG 32 lubricant, and weighs 750 g.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue displays this as a separate pneumatic symbol on its own page, and no functional details are provided in the main specifications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06ASK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.