Airtac GAC F.R.L. Unit GAC200C06ASN
The AirTAC Airtac GAC F.R.L. Unit GAC200C06ASN is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06ASN
Delivering cleaned, regulated and lubricated air for small pneumatics, this GAC200C06ASN assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port pairs with a 40 um element, while the standard type governs pressure across 0.15-0.9 MPa (20-130 psi). A metal bowl houses the 25 cc condensate sump and 36 cc oil reservoir.
Because no gauge is supplied, operators must add one to the 1/8in gauge connection to read the set pressure. The automatic drain clears liquid without manual intervention, and the build sequence adds oil mist downstream of the regulator to protect internal seats from fouling.
Airtac GAC F.R.L. Unit GAC200C06ASN Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06ASN |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200C06ASN
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06ASN Is Used
Micro-Pneumatic Pick-and-Place
Feeds tiny suction cups and precision grippers on electronics assembly lines, utilizing the 1/8in port for low-flow spot actuation.
Benchtop Tool Conditioning
Prepares air for miniature air drills or grinders in a workshop, adding necessary oil mist to keep high-speed spindles lubricated.
Laboratory Actuator Supply
Stabilizes outlet pressure for sensitive valve arrays on test rigs, with the automatic drain handling condensate during unattended overnight runs.
Is the Airtac GAC F.R.L. Unit GAC200C06ASN the Right Air-Prep Unit?
Choose this 750 g unit for single actuators or compact jigs where space is tight, stepping up to the GAC300 if your duty approaches the 1750 L/min plotted curve at 0.7 MPa inlet. The metal bowl suits harsher industrial settings, while the PT thread dictates a MPa/psi gauge scale if one is fitted later. If the downstream line must remain free of oil, select a filter-regulator instead of this combination. Replacement spares follow the 200-06 suffix: GAF200-06, GAR200-06 and GAL200-06. The 1.5 MPa proof pressure provides a 1.5x burst-test margin above the 1.0 MPa maximum, though it is never permission to run above that ceiling.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06ASN FAQ
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) and tolerates a maximum pressure of 1.0 MPa (145 psi) with a 1.5 MPa (215 psi) proof rating. Operating temperature spans -5 to 70 C. The metal bowl holds a 25 cc drain capacity and a 36 cc oil capacity, using ISO VG 32 lubricant. Total weight is 750 g.
The N in the model code indicates no gauge is supplied. You can mount your own circular dial into the 1/8in gauge connection on the regulator body, matching the MPa/psi scale associated with the default PT thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06ASN
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.