Airtac GAC F.R.L. Unit GAC200C06ASNK
The AirTAC Airtac GAC F.R.L. Unit GAC200C06ASNK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06ASNK
Delivering cleaned, regulated and lubricated air for a single actuator, this GAC200C06ASNK assembly integrates a filter, regulator and lubricator on one L-shape bracket. The 1/8in port pairs with a 750 g body mass, making it a compact choice for tight panels where support must come from a frame rather than the tubing. It runs at 0.15-0.9 MPa (20-130 psi) and uses a 40 um element.
Because the metal bowl is fitted with an automatic drain, condensate clears without an operator attending the 25 cc bowl. No gauge is supplied, but a 1/8in gauge connection allows one to be added later. The reverse-flow valve is fitted, shown as a separate pneumatic symbol in the catalogue, and oil mist is introduced downstream of the regulator to keep the seat clean.
Airtac GAC F.R.L. Unit GAC200C06ASNK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06ASNK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200C06ASNK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06ASNK Is Used
Small Pneumatic Jigs
Feeds a single small-bore cylinder in a benchtop jig, ensuring the actuator receives steady pressure and oil mist for smooth cycling.
Air-Powered Hand Tools
Prepares air for compact air motors or screwdrivers, using the 40 um element to block grit from damaging internal vanes.
Lab Automation
Conditions supply for a dedicated test fixture, where the automatic drain prevents moisture buildup during prolonged unattended runs.
Is the Airtac GAC F.R.L. Unit GAC200C06ASNK the Right Air-Prep Unit?
This model suits unattended or wet lines thanks to its automatic drain, while the metal bowl offers a robust build for industrial environments. If the machine might require pressures above 0.4 MPa, this standard type is the correct choice over the lower-pressure variant. Remember that oil mist is added downstream; choose a filter-regulator instead if the line must stay oil-free. Spares follow the same body-port suffix: GAF200-06, GAR200-06 and GAL200-06. Stepping up to the GAC300 roughly doubles the flow envelope to 3000 L/min at 0.7 MPa inlet, whereas this GAC200 plots to 1750 L/min. Finally, the 1.5 MPa proof pressure against a 1.0 MPa maximum provides a 1.5x burst-test margin, not permission to run above 1.0 MPa.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06ASNK FAQ
This unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 25 cc drain bowl and a 36 cc oil bowl, weighs 750 g, and runs from -5 to 70 C using ISO VG 32 lubricant.
The N in the ordering code means no gauge is supplied from the factory. The body features a 1/8in gauge connection, so you can install your own gauge to read the set pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06ASNK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.