Airtac GAC F.R.L. Unit GAC200C06ASNW
The AirTAC Airtac GAC F.R.L. Unit GAC200C06ASNW is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06ASNW
Delivering cleaned, regulated and lubricated air for compact pneumatic duties, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/8" port pairs with a 5 um element to trap fine particles before they reach sensitive valves. Because the metal bowl is fitted, the assembly suits harsher industrial settings where standard PC bowls might be at risk.
The standard pressure range spans 0.15-0.9 MPa (20-130 psi), while an automatic drain actively clears the 25 cc condensate bowl without operator input. No gauge is supplied, but a 1/8" connection is ready if you need to add one. Weighing 750 g, the assembly is light enough for panel mounting without stressing the downstream tubing.
Airtac GAC F.R.L. Unit GAC200C06ASNW Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06ASNW |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200C06ASNW
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06ASNW Is Used
Micro-Assembly Jigs
Feeds clean, lubricated air to small grippers and precision nozzles handling delicate electronics.
Laboratory Automation
Conditions air for single-actuator test rigs where the 5 um element protects sensitive flow controls.
Pick-and-Place Heads
Supplies stable 1/8" ported pneumatic heads requiring consistent pressure and fine particulate removal.
Is the Airtac GAC F.R.L. Unit GAC200C06ASNW the Right Air-Prep Unit?
This model uses a 5 um element for precision instrumentation, whereas the standard 40 um grade suits general actuation. The automatic drain is decisive for unattended or wet lines, emptying the 25 cc bowl on its own. Since no gauge is included, the set pressure cannot be read locally unless you fit one to the 1/8" port. If your downstream line must remain oil-free, choose a filter-regulator instead, as the lubricator here adds oil mist downstream of the regulator. Replacement spares follow the body and port directly: GAF200-06, GAR200-06 and GAL200-06. Stepping up to the GAC300 body shifts the plotted flow envelope from 1750 L/min to 3000 L/min at 0.7 MPa inlet, an increase of roughly 1.7x.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06ASNW FAQ
This standard type operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 25 cc drain bowl, a 36 cc oil bowl, and weighs 750 g. The recommended lubricant is ISO VG 32.
The N in the ordering code means no gauge is supplied. The body has a 1/8" gauge connection, so you can install a separate gauge reading in MPa/psi to match the default PT thread if you need to monitor the downstream set pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06ASNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.