Airtac GAC F.R.L. Unit GAC200C06L
The AirTAC Airtac GAC F.R.L. Unit GAC200C06L is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06L
Delivering cleaned, regulated and lubricated air for compact pneumatics, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port pairs with a 40 um element, while the lower pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi). A circular gauge is fitted, reading MPa/psi for the default PT thread.
The metal bowl equips this 750 g assembly for rugged environments, and the integrated semi-auto and manual drain handles condensate removal. Air passes through the filter first, then the regulator, with oil mist added downstream so the regulator seat stays clean. The 25 cc drain bowl and 36 cc oil capacity set the maintenance frequency for single-actuator duties.
Airtac GAC F.R.L. Unit GAC200C06L Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06L |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC200C06L
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06L Is Used
Small Pneumatic Jigs
Feeds filtered and lubricated air at a stable low pressure to delicate clamping jigs on electronics assembly lines.
Benchtop Actuators
Conditions air for single-acting cylinders on light-duty benchtop tools where a 1/8in port is sufficient.
Lab Test Fixtures
Regulates downstream pressure to 0.4 MPa for sensitive laboratory testing fixtures requiring precise low-force actuation.
Is the Airtac GAC F.R.L. Unit GAC200C06L the Right Air-Prep Unit?
Choose this 1/8in port model for small jigs or single actuators where the machine strictly operates below 0.4 MPa. If the application might eventually require 0.9 MPa, the L type is the wrong part, as the standard S type offers a much broader 0.15-0.9 MPa range. The metal bowl provides a durable alternative to PC or nylon, though buyers should confirm chemical compatibility for aggressive surroundings. Because oil mist is added downstream, choose a separate filter-regulator if the line must remain oil-free. For maintenance, the three units are separately orderable as GAF200-06, GAR200-06 and GAL200-06. Stepping up to the GAC300 increases the plotted flow envelope from 1750 to 3000 L/min at 0.7 MPa inlet, an envelope roughly 1.7x larger than this body.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06L FAQ
This lower-pressure F.R.L. unit operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 1/8in port, a 40 um element, a 25 cc drain bowl, a 36 cc oil bowl, and weighs 750 g. The operating temperature is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The C in the code denotes a metal bowl, chosen for durability over the standard PC or nylon options. Because there is no A in the code, the unit is fitted with both a semi-auto and a manual drain, allowing condensate to be dumped on each pressure drop or on demand.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06L
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.