Airtac GAC F.R.L. Unit GAC200C06LNWK
The AirTAC Airtac GAC F.R.L. Unit GAC200C06LNWK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06LNWK
Delivering cleaned, regulated and lubricated air for light-duty pneumatics, this AirTAC GAC200C06LNWK combines a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port feeds the 5 um element, trapping fine particles before the regulator steps the supply down to the 0.15-0.4 MPa (20-58 psi) lower-pressure range. A metal bowl houses the 25 cc condensate sump and 36 cc oil reservoir.
Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling. No gauge is supplied, but a 1/8in connection allows adding one if visual pressure monitoring is needed. The assembly includes a reverse-flow (reflux) valve, shown as a separate pneumatic symbol in the catalogue, and tips the scales at 750 g.
Airtac GAC F.R.L. Unit GAC200C06LNWK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06LNWK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200C06LNWK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06LNWK Is Used
Micro-Assembly Jigs
Feeds delicate pick-and-place nozzles requiring low-force actuation and fine 5 um filtration to protect tiny precision valves.
Laboratory Pneumatics
Conditions air for sensitive analytical instruments where the 0.15-0.4 MPa lower-pressure range prevents damage to small test components.
Small Air Tools
Supplies a controlled oil mist to miniature air grinders or screwdrivers, extending tool life without over-pressurizing the mechanism.
Is the Airtac GAC F.R.L. Unit GAC200C06LNWK the Right Air-Prep Unit?
Choose this 750 g assembly for single actuators where the machine demands a strict 0.15-0.4 MPa (20-58 psi) ceiling, avoiding it entirely if higher pressure might be required. The 5 um element suits precision valves but needs more frequent service than the standard 40 um grade. Condensate is cleared by paired semi-auto and manual drains, emptying the 25 cc sump on pressure drops or demand. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. The three units are separately orderable as GAF200-06, GAR200-06 and GAL200-06. Stepping up to the GAC300 body shifts the plotted flow envelope from 1750 L/min to 3000 L/min at 0.7 MPa inlet, roughly a 1.7x increase.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06LNWK FAQ
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. The temperature range is -5 to 70 C. It features a 25 cc drain bowl and a 36 cc oil bowl, uses ISO VG 32 lubricant, and weighs 750 g.
The N in the model code indicates no gauge is supplied. The body has a 1/8in gauge connection, so you can install a separate PT-threaded gauge reading MPa/psi to monitor the 0.15-0.4 MPa setpoint if visual verification is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06LNWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.