Airtac GAC F.R.L. Unit GAC200C06LW
The AirTAC Airtac GAC F.R.L. Unit GAC200C06LW is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06LW
Delivering cleaned, regulated and lubricated air for compact pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port pairs with a 5 um element to trap fine particles before they reach sensitive valves. A circular gauge is fitted, reading MPa/psi for the default PT thread, so operators can verify the set pressure directly.
Because the lubricator sits last in the sequence, oil mist is added downstream of the regulator seat, preventing fouling. This lower-pressure type regulates between 0.15-0.4 MPa (20-58 psi). The metal bowl equips the assembly for rugged environments, while the 25 cc drain bowl and 36 cc oil capacity dictate a frequent maintenance rhythm.
Airtac GAC F.R.L. Unit GAC200C06LW Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06LW |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC200C06LW
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06LW Is Used
Micro-Assembly Jigs
Feeds precision grippers handling small electronic components where a 5 um element protects delicate valves.
Laboratory Pneumatics
Conditions air for low-force test fixtures requiring a stable 0.15-0.4 MPa output and fine particulate removal.
Miniature Actuators
Supplies single-acting cylinders in compact dental or medical chair mechanisms with metered oil mist.
Is the Airtac GAC F.R.L. Unit GAC200C06LW the Right Air-Prep Unit?
Choose this 750 g assembly for single actuators or small jigs where space is tight. The 5 um element provides finer filtration than the 40 um standard, ideal for instrument air, though it requires more frequent replacement. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. The three units are separately orderable as GAF200-06, GAR200-06 and GAL200-06, meaning a damaged bowl does not require replacing the whole assembly. The semi-auto and manual drain pair clears condensate on every pressure drop or on demand. Stepping up to the GAC300 increases the plotted flow envelope from 1750 to 3000 L/min at 0.7 MPa inlet, but selecting the L type here means the 0.4 MPa ceiling is just 44% of the standard 0.9 MPa maximum.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06LW FAQ
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 1/8in port, a 5 um element, a 25 cc drain bowl, a 36 cc oil bowl, and weighs 750 g. The temperature range is -5 to 70 C and the recommended lubricant is ISO VG 32.
The 5 um element captures far finer particles than the 40 um standard, suiting precision valves and instrument air at the cost of more frequent service. The metal bowl provides a rugged build choice for demanding environments, sharing the exact same 1.0 MPa maximum pressure rating as the standard PC bowl.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06LW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.