Airtac GAC F.R.L. Unit GAC200C06SK
The AirTAC Airtac GAC F.R.L. Unit GAC200C06SK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06SK
Delivering cleaned, regulated and lubricated air for compact pneumatics, this GAC200C06SK combines a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port feeds a 0.15-0.9 MPa (20-130 psi) standard pressure range, protected by a 40 um element inside a durable metal bowl. A pre-fitted circular gauge reads in MPa/psi for the default PT thread, while the included reflux valve appears as a distinct pneumatic symbol in the catalogue.
Weighing 750 g, the assembly integrates a 25 cc condensate bowl and a 36 cc oil reservoir. Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat stays clean. Condensate is managed by a semi-auto and manual drain pair, discharging on pressure drops or on demand.
Airtac GAC F.R.L. Unit GAC200C06SK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06SK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC200C06SK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06SK Is Used
Small Pneumatic Jigs
Conditions air for compact pick-and-place jigs where a single 1/8in actuator requires precise 0.15-0.9 MPa pressure and oil mist for seal longevity.
Benchtop Tooling
Prepares supply for light-duty benchtop assembly tools, using the 40 um element to protect small internal valves from line debris.
Lab Automation
Feeds compact lab automation stations, relying on the 25 cc drain bowl to capture moisture in intermittent duty cycles.
Is the Airtac GAC F.R.L. Unit GAC200C06SK the Right Air-Prep Unit?
This 1/8in unit suits single actuators or small jigs, whereas stepping up to a GAC300 with a 3/8in port raises the plotted flow envelope from 1750 to 3000 L/min at 0.7 MPa inlet. The metal bowl offers robust physical protection compared to standard PC, and the 40 um element balances particle capture with service life. Because the lubricator introduces oil mist downstream, choose a separate filter-regulator if your line must remain strictly oil-free. For maintenance, the assembly accepts GAF200-06, GAR200-06 and GAL200-06 replacement units. With a 1.0 MPa maximum supply and a 0.9 MPa top setting, you have only 0.1 MPa of regulation headroom, so plan an inlet pressure near maximum if you need the highest output.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06SK FAQ
The standard pressure range is 0.15-0.9 MPa (20-130 psi), with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 750 g, and uses a 25 cc drain bowl with a 36 cc oil bowl. The recommended lubricant is ISO VG 32.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue lists this as a separate pneumatic symbol with details on its own page, and it does not alter the standard PT thread or the fitted MPa/psi gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06SK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.