Airtac GAC F.R.L. Unit GAC200C06SNW
The AirTAC Airtac GAC F.R.L. Unit GAC200C06SNW is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06SNW
Supplying clean, regulated and lubricated air to a single small actuator, the AirTAC GAC200C06SNW is a three-unit F.R.L. combination built around a 1/8in port. The metal bowl houses a 5 um element that catches fine particulates before air reaches the regulator, which operates within the 0.15-0.9 MPa (20-130 psi) standard range. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal mechanism.
Weighing 750 g, this compact assembly is designed for bracket mounting rather than tubing support, and its 25 cc condensate bowl paired with a 36 cc oil reservoir sets the maintenance interval for low-demand jigs. No gauge is supplied, but a 1/8in gauge connection is provided if operators need to add instrumentation later. The metal bowl makes the unit suitable for environments where polycarbonate might be at risk, provided chemical compatibility is confirmed from the datasheet.
Airtac GAC F.R.L. Unit GAC200C06SNW Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06SNW |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200C06SNW
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06SNW Is Used
Micro-Pneumatic Jigs
Feeds filtered and lubricated air to small-bore cylinders on delicate electronic assembly jigs where a 5 um element protects tiny internal seals.
Benchtop Tool Lines
Conditions air for single-station benchtop pneumatic tools, using the 1/8in port to maintain steady pressure for low-consumption duty cycles.
Lab Automation
Regulates supply for compact lab automation actuators, relying on the metal bowl to withstand splashed solvents better than standard plastic.
Is the Airtac GAC F.R.L. Unit GAC200C06SNW the Right Air-Prep Unit?
Choose this GAC200 body for light-duty tasks, stepping up to the GAC300 if you need a larger 60 cc drain bowl or a flow envelope plotted to 3000 L/min at 0.7 MPa inlet instead of the 1750 L/min curve on this smaller unit. The 5 um W element traps far finer particles than the 40 um standard, suiting precision valves, though it will require more frequent element swaps. A semi-auto and manual drain are both fitted to clear the 25 cc condensate bowl, while the PT thread dictates a MPa/psi scale if you add a gauge to the 1/8in connection. If the downstream line must stay completely oil-free, omit the lubricator and choose a filter-regulator instead. Replacement spares share the 200-06 suffix: GAF200-06, GAR200-06 and GAL200-06. The 1.5 MPa proof pressure provides a 1.5x burst-test margin over the 1.0 MPa maximum, but this is not permission to run above the 1.0 MPa ceiling.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06SNW FAQ
This standard type F.R.L. unit operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 1/8in port, a 5 um element, a 25 cc drain bowl, a 36 cc oil bowl, and weighs 750 g. The operating temperature is -5 to 70 C, and the recommended lubricant is ISO VG 32.
No, because an N follows the port in the code, no gauge is supplied. However, the body includes a 1/8in gauge connection, allowing you to install a separate instrument reading in MPa/psi to match the default PT thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06SNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.