Airtac GAC F.R.L. Unit GAC200C06SNWK
The AirTAC Airtac GAC F.R.L. Unit GAC200C06SNWK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06SNWK
Delivering cleaned, regulated and lubricated air for pneumatic setups, this GAC200C06SNWK F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port feeds a standard pressure range of 0.15-0.9 MPa (20-130 psi), while the 5 um element traps fine particles for sensitive instrumentation. A reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol with details on its own page.
Air passes through the filter first, then the regulator, before oil mist is added last by the lubricator so the regulator seat never gets fouled. This specific build carries a robust metal bowl and skips the gauge entirely, leaving a 1/8in gauge connection open if you need to add instrumentation later. Weighing 750 g, the assembly is small enough for tight panels, and the separate GAF200-06, GAR200-06 and GAL200-06 components are orderable if only the element needs replacing.
Airtac GAC F.R.L. Unit GAC200C06SNWK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06SNWK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200C06SNWK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06SNWK Is Used
Precision Valve Lines
Feeds clean, oil-misted air to sensitive directional valves on small jig grinders where the 5 um element prevents seat contamination.
Laboratory Pneumatics
Regulates instrument air for compact benchtop test rigs, using the 1/8in port to maintain a steady 0.15-0.9 MPa supply for micro-actuators.
Bench Tool Networks
Conditions air for standalone pneumatic tools in a workshop, relying on the 36 cc oil bowl to keep small pistons lubricated during intermittent duty.
Is the Airtac GAC F.R.L. Unit GAC200C06SNWK the Right Air-Prep Unit?
Choose this 1/8in port configuration when you need the compact 750 g size class of the GAC200 rather than stepping up to the GAC300, which carries a 60 cc drain bowl and a flow envelope plotted to 3000 L/min at 0.7 MPa inlet. The metal bowl suits harsher environments where a standard PC bowl might not hold up, and the 5 um element provides finer filtration than the 40 um standard, ideal for protecting precision valves at the cost of more frequent element service. Because the lubricator adds oil mist downstream, pick a filter-regulator instead if your line must remain strictly oil-free. The semi-auto and manual drain pair requires an operator to manage condensate from the 25 cc bowl, and no gauge is supplied, so set pressure cannot be read without adding one to the 1/8in connection. Keep in mind the 1.5x overpressure margin: the 1.5 MPa proof pressure against the 1.0 MPa maximum is a burst-test rating, not permission to run above 1.0 MPa.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06SNWK FAQ
This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It functions from -5 to 70 C, uses a 25 cc drain bowl and a 36 cc oil bowl, weighs 750 g, and requires ISO VG 32 or equivalent lubricant.
The N in the model code indicates no gauge is supplied. The block leaves a 1/8in gauge connection open, allowing operators to install a separate PT-threaded gauge reading MPa/psi to match their specific monitoring preferences.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06SNWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.