
The AirTAC GAC F.R.L. Unit GAC200C08ASNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for compact pneumatics, this GAC200 unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port serves smaller actuators, while the 5 um element captures fine particles for sensitive valves. Because the lubricator sits last in the sequence, oil mist enters downstream of the regulator seat, preventing fouling. This variant uses a metal bowl and an automatic drain, suited to rugged or unattended duty.
Operating pressure spans 0.15-0.9 MPa (20-130 psi), with a 1.0 MPa (145 psi) maximum and 1.5 MPa (215 psi) proof rating. No gauge is supplied, but the body taps a 1/8in connection if you need to add one. The 25 cc condensate sump and 36 cc oil reservoir suit light-duty cycles. Replacement internals follow the GAF200-08, GAR200-08 and GAL200-08 part numbers. Order code GAC200C08ASNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200C08ASNWT |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds miniature pneumatic grippers on electronics assembly lines, where the 5 um element protects tiny valve bores from particulate stall.
Conditions air for small pneumatic screwdrivers and staplers, ensuring a steady oil mist reaches the rotating vanes during intermittent workshop duty.
Regulates supply for compact analytical instruments, using the automatic drain to clear moisture without opening enclosure panels.
Choose this 750 g assembly for single actuators or small jigs where space is tight. The metal bowl handles rougher industrial settings better than standard PC, and the automatic drain empties condensate without an operator. Stepping up to the GAC300 increases the flow envelope from 1750 to 3000 L/min at 0.7 MPa inlet and doubles the oil capacity to 98 cc, making the larger body better for continuous duty. Keep in mind that if the downstream line must stay oil-free, you should select a filter-regulator instead of this lubricated combination. Spares share the 200-08 suffix across all three modules.
When sizing supply, note that the 1.0 MPa maximum inlet leaves only 0.1 MPa of headroom above the 0.9 MPa standard setting, so you need a supply near maximum pressure to achieve the highest regulated output.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 25 cc drain bowl and a 36 cc oil bowl, weighs 750 g, and uses ISO VG 32 lubricant.
The N in the part number signifies no gauge is supplied. The block retains a 1/8in gauge connection, allowing you to install a separate gauge if monitoring the 0.15-0.9 MPa setpoint is required for your application.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.