
The AirTAC GAC F.R.L. Unit GAC200C08ASWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, pressure-set and oil-misted air for downstream moving parts, this AirTAC GAC200C08ASWT is a three-unit filter, regulator and lubricator pre-plumbed on a single L-shape bracket with quick mounting clamps. The 1/4in port pairs with a 5 um element to trap fine particles for sensitive pneumatics, while the standard pressure range operates at 0.15-0.9 MPa (20-130 psi). Air passes filter, regulator then lubricator, ensuring oil mist is added downstream so the regulator seat never fouls.
The metal bowl equips this compact 750 g assembly, which carries a 25 cc condensate capacity and a 36 cc oil reservoir. An automatic drain clears accumulated water without an operator, making it suitable for unattended stations. A circular gauge is fitted, reading MPa/psi for the default NPT thread, so technicians can verify the set pressure directly at the unit.
| Model | Airtac GAC F.R.L. Unit GAC200C08ASWT |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds instrument air to sensitive solenoid valve banks, leveraging the 5 um element to prevent sticking in tight-tolerance spools.
Conditions air for small pneumatic pick-and-place arms on a workbench, where the 750 g weight allows simple frame mounting.
Supplies oil-misted air to linear guide actuators, ensuring continuous lubrication for moving carriages in compact assemblies.
Choose this 1/4in body when feeding a single actuator or a small jig, stepping up to the GAC300 if you need the 3000 L/min plotted flow envelope at 0.7 MPa inlet instead of the 1750 L/min curve offered here. The 5 um element provides finer filtration than the standard 40 um grade, ideal for precision valves but requiring more frequent element service. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. The automatic drain is decisive for wet lines, and individual spares follow the body-port suffix: GAF200-08, GAR200-08 and GAL200-08. Because the maximum supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 1/4in port, a 5 um element, a 25 cc drain bowl, a 36 cc oil bowl, and weighs 750 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The metal bowl provides a robust housing for demanding environments, while the automatic drain actively expels condensate from the 25 cc sump without manual intervention, reducing operator attendance on wet lines.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.