
The AirTAC GAC F.R.L. Unit GAC200C08LNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for light-duty pneumatics, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The metal bowl equips this 1/4in ported unit, which conditions air within a strict 0.15-0.4 MPa (20-58 psi) lower pressure range using a 40 um element.
Because the lubricator introduces oil mist downstream of the regulator seat, the internal components stay clean during operation. The assembly weighs 750 g and lacks a factory gauge, but a 1/8in connection is ready if you need to add instrumentation to verify the secondary pressure. Order code GAC200C08LNT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200C08LNT |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate pneumatic grippers and small-bore cylinders on electronics assembly lines where operating pressures must stay below 0.4 MPa.
Conditions air for sensitive benchtop equipment and low-pressure test fixtures, adding necessary oil mist while filtering out 40 um particulates.
Prepares supply for single-actuator door mechanisms and small clamping devices that rely on a steady, low-pressure air source.
This lower-pressure type (L) tops out at 0.4 MPa, making it the wrong choice if a machine might ever require more downstream force. The metal bowl offers a robust housing for industrial settings, and the semi-auto plus manual drain pair handles condensate from the 25 cc bowl. If your application requires completely oil-free exhaust, omit the lubricator and select a dedicated filter-regulator instead. Replacement spares share the 200-08 suffix: GAF200-08, GAR200-08 and GAL200-08.
Stepping up to the GAC300 body increases the plotted flow envelope from 1750 L/min to 3000 L/min at 0.7 MPa inlet, but choosing this compact 0.4 MPa ceiling means you operate at just 44% of the standard 0.9 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This unit operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 1/4in port, a 25 cc drain bowl, a 36 cc oil bowl, a 40 um element, and weighs 750 g. The temperature range is -5 to 70 C and the recommended lubricant is ISO VG 32.
The N in the product code indicates no gauge is supplied. The body has a 1/8in gauge connection, allowing you to install your own circular gauge to monitor the 0.15-0.4 MPa range if visual pressure verification is needed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.