
The AirTAC GAC F.R.L. Unit GAC200C08LNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC GAC200C08LNWT unit integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port pairs with a 5 um element to trap fine particles, while the lower-pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi). A metal bowl equips this variant, and no gauge is supplied, leaving the 1/8in gauge connection open for a separate instrument.
Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat stays clean. The 25 cc drain bowl and 36 cc oil capacity mean this 750 g assembly requires frequent attention compared to larger frames. Spares follow the 200-08 suffix, so GAF200-08, GAR200-08 and GAL200-08 drop right in without replacing the whole bracket. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200C08LNWT |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure cylinders handling delicate electronics where a 5 um element prevents valve clogging.
Conditions air for sensitive benchtop equipment requiring a strict 0.15-0.4 MPa operating range.
Supplies regulated and lubricated air to small grippers holding fragile components during machining.
Choose this compact 1/4in body when feeding a single actuator or a small jig that needs precise, low-pressure control. The 5 um element catches far finer particulates than the standard 40 um grade, making it suitable for sensitive instrument air, though it will need more frequent replacement. Because the N after the port means no gauge is supplied, you cannot read the set pressure without adding one to the 1/8in connection. The semi-auto and manual drain pair fitted here dumps condensate on every pressure drop or on demand, and the NPT thread sets a MPa/psi scale if a gauge is added. If the machine requires oil-free air downstream, omit the lubricator and choose a filter-regulator instead. Stepping up to the GAC300 body raises the plotted flow envelope to 3000 L/min at 0.7 MPa inlet from this model's 1750 L/min, but note that the lower-pressure type caps output at 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and it uses a 5 um element. It features a 25 cc drain bowl, a 36 cc oil bowl, weighs 750 g, and requires ISO VG 32 lubricant.
The N in the ordering code indicates no gauge is supplied. To monitor the 0.15-0.4 MPa setting, you must fit a separate gauge to the 1/8in connection on the body, matching the MPa/psi scale of the default NPT thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.