
The AirTAC GAC F.R.L. Unit GAC200C08LNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for compact pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/4in port pairs with a 5 um element to trap fine particles, while the lower pressure type governs output between 0.15-0.4 MPa (20-58 psi). Its 750 g mass makes it suitable for tight panels where larger assemblies will not fit.
Air passes through the filter first, then the regulator, with oil mist added last downstream of the regulator seat to prevent fouling. This specific code uses a metal bowl and omits the pressure gauge, leaving a 1/8in gauge connection for operators to add their own indicator. The reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol with details on its own page. Order code GAC200C08LNWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200C08LNWTK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure cylinders handling delicate electronics where a 5 um element protects tiny nozzle clearances.
Conditions air for benchtop test fixtures requiring stable 0.4 MPa output and fine particulate control.
Supplies metered oil mist to miniature grinders and screwdrivers, extending tool life in light-duty repair stations.
Choose this configuration when a machine requires precision filtration and a strict low-pressure ceiling, as the 0.15-0.4 MPa range prevents accidental over-pressurization of delicate actuators. The 5 um element provides finer protection than the standard 40 um grade, trading off a higher need for element servicing to protect sensitive valves. Because the lubricator injects oil into the line, select a filter-regulator instead if the downstream process demands dry, unlubricated air. The metal bowl suits harsher environments, and the semi-auto plus manual drain pair requires an operator to manage the 25 cc condensate capacity. Should a component fail, order the GAF200-08 filter, GAR200-08 regulator and GAL200-08 lubricator individually rather than replacing the whole assembly. Stepping up to the GAC300 body increases the plotted flow envelope from 1750 to 3000 L/min at 0.7 MPa inlet, but choosing this L type means the 0.4 MPa ceiling is just 44% of the standard 0.9 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 1/4in port, a 5 um element, a 25 cc drain bowl, a 36 cc oil bowl, and weighs 750 g. The unit functions between -5 to 70 C and uses ISO VG 32 lubricant.
The N in the ordering code means no pressure gauge is supplied, so the set pressure cannot be read without adding one. The body features a 1/8in gauge connection, allowing you to install a compatible NPT-thread gauge with an MPa/psi scale to monitor the 0.15-0.4 MPa output.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.