
The AirTAC GAC F.R.L. Unit GAC200C08SNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this assembly pairs a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port serves compact installations, while the standard pressure range operates from 0.15-0.9 MPa (20-130 psi). A 40 um element captures solid grain, and the metal bowl equips the unit for rugged environments.
Because no gauge is supplied, operators must add one to the 1/8in gauge connection to read the set pressure. The reverse-flow (reflux) valve is fitted, appearing as a distinct pneumatic symbol in the catalogue. Condensate is managed by a semi-auto and manual drain pair, and the 25 cc drain bowl plus 36 cc oil capacity dictate frequent checks on this 750 g unit. Order code GAC200C08SNTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200C08SNTK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Prepares air for small pneumatic presses and handheld grinders in a fabrication workshop.
Supplies oil mist and stable pressure to compact handling jigs mounting single actuators.
Conditions air for sensitive test fixtures requiring regulated flow within a compact footprint.
This GAC200 unit suits light-duty actuators, offering a 1750 L/min plotted flow envelope at 0.7 MPa inlet, which is roughly 29% of the GAC300's 3000 L/min capacity. The metal bowl provides durability where impacts might occur, and the 40 um element balances protection with service life. If your process requires strictly oil-free air downstream, omit the lubricator and choose a filter-regulator instead. For maintenance, the assembly accepts GAF200-08, GAR200-08 and GAL200-08 replacement units. Keep in mind the 1.5 MPa proof pressure provides a 1.5x burst-test margin over the 1.0 MPa maximum, which is not permission to run above the limit.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the drain bowl holds 25 cc, the oil bowl holds 36 cc, the unit weighs 750 g, and the recommended lubricant is ISO VG 32.
The N in the code means no gauge is supplied, but you can install one using the 1/8in connection. The K indicates a reverse-flow valve is fitted, which the catalogue details on its own page as a separate symbol.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.