
The AirTAC GAC F.R.L. Unit GAC200C08SNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for compact pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port serves the lightweight 750 g GAC200 body, while the 5 um element traps fine particles for sensitive downstream valves. It regulates from 0.15-0.9 MPa (20-130 psi) and is built without a gauge, leaving a 1/8in connection for adding one later.
The metal bowl equips this assembly for rugged environments, and the semi-auto plus manual drain pair handles condensate from the 25 cc bowl. A reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol. Because the lubricator injects oil mist downstream of the regulator, the regulating seat stays clean; choose a separate filter-regulator if the line must remain oil-free. Order code GAC200C08SNWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200C08SNWTK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds filtered and oiled air to delicate pick-and-place jigs relying on tight-clearance cylinders.
Conditions supply air for benchtop fluid handling systems where the 5 um element protects sensitive valves.
Prepares air for low-consumption handheld drivers where a 1/4in port and a 750 g footprint fit tight cells.
This model suits single actuators or small jigs where the 1750 L/min plotted flow envelope at 0.7 MPa inlet is sufficient. Stepping up to the GAC300 increases that envelope to 3000 L/min and raises the condensate capacity from 25 cc to 60 cc. If your machine might need more pressure, remember this standard type tops out at 0.9 MPa. Replacement parts share the 200-08 suffix: order GAF200-08, GAR200-08 and GAL200-08 individually. The 1.5 MPa proof pressure provides a 1.5x burst-test margin over the 1.0 MPa maximum, but it is not permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 25 cc drain bowl, a 36 cc oil bowl, and weighs 750 g. The recommended lubricant is ISO VG 32.
The N in the model code indicates no gauge is supplied, though the body has a 1/8in gauge connection for adding one. The NPT thread default means a fitted gauge would read MPa/psi. This model also includes a reverse-flow valve and a 5 um element for fine filtration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.