
The AirTAC GAC F.R.L. Unit GAC200C08SWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Supplying clean, regulated and lubricated air to a single actuator or small jig is the core task of this AirTAC combination. The assembly integrates a filter, regulator and lubricator on a shared L-shape bracket, feeding the line through a 1/4in port. Because the 5 um element sits upstream of the pressure regulator, the internal seat stays clear of grit, while the lubricator introduces oil mist downstream so it never coats the adjustment spring. The standard type governs pressure across 0.15-0.9 MPa (20-130 psi).
A circular gauge is fitted to read the set point in MPa/psi, matching the default NPT thread. The metal bowl equips this unit with a 25 cc condensate sump and a 36 cc oil reservoir, meaning maintenance visits are frequent compared to larger frames. This 750 g assembly carries the reverse-flow valve, which the catalogue depicts as a separate pneumatic symbol with details on its own page. Order code GAC200C08SWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200C08SWTK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, oiled air at a stable pressure to delicate clamping jigs on a benchtop assembly station.
Conditions air for a standalone pneumatic press or riveting gun, protecting its internal seals with fine 5 um filtration.
Prepares supply for sensitive lab automation where precise low-flow regulation and fine particle removal are required.
Choose this 1/4in ported unit when a compact 750 g frame is required and the air supply must be exceptionally clean, as the 5 um element traps far finer particles than the standard 40 um grade at the cost of more frequent replacement. The metal bowl suits harsher environments where a standard PC bowl might not be suitable. It carries a semi-auto and manual drain pair, requiring an operator to trigger the dump or rely on the pressure-drop release. If the downstream line must remain free of oil, omit the lubricator and choose a dedicated filter-regulator instead. Spares are ordered individually as GAF200-08, GAR200-08 and GAL200-08. Stepping up to the GAC300 body shifts the plotted flow envelope from 1750 L/min to 3000 L/min at 0.7 MPa inlet, an increase of roughly 1.7x.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 750 g, holds 25 cc of condensate and 36 cc of oil, and requires ISO VG 32 lubricant.
The K denotes that a reverse-flow (reflux) valve is fitted to this assembly. The official catalogue shows this component as a distinct pneumatic symbol and defers to its own page for functional details, which are not included in the standard combination data.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.