
The AirTAC GAC F.R.L. Unit GAC200N08ALNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC200N08ALNT is a three-unit F.R.L. combination pre-assembled on a single L-shape bracket with quick mounting clamps. Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. It features a 1/4in port, a 40 um element, and a nylon bowl.
Configured for low-pressure duties, the regulator sets an outlet range of 0.15-0.4 MPa (20-58 psi). The automatic drain clears condensate without an operator, which is decisive for unattended or wet lines, while the 25 cc drain bowl and 36 cc oil bowl dictate the maintenance interval. No gauge is supplied, but a 1/8in gauge connection allows one to be added later to read the set pressure. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200N08ALNT |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds small pneumatic clamps on assembly fixtures that require a delicate 0.4 MPa maximum pressure to avoid crushing delicate components.
Prepares air for light-duty benchtop air motors by adding a controlled oil mist, extending the life of internal vanes in a workshop setting.
Conditions supply for single-actuator test rigs where the automatic drain handles condensate removal without interrupting experiments.
Choose this 750 g unit for single actuators or small jigs where the machine demands a maximum of 0.4 MPa; if the application may ever need more pressure, the L type is the wrong part. The nylon bowl suits standard -5 to 70 C environments, and buyers should confirm compatibility for aggressive surroundings. Because oil mist is added downstream, choose a separate filter-regulator if the line must stay oil-free. Spares follow the same body-port suffix: GAF200-08, GAR200-08 and GAL200-08. Stepping up to the GAC300 roughly doubles the plotted flow envelope to 3000 L/min at 0.7 MPa inlet compared to this body's 1750 L/min, but choosing this L type means giving up 44% of the Standard type's 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, uses a 40 um element, has a 25 cc drain bowl, a 36 cc oil bowl, weighs 750 g, and requires ISO VG 32 lubricant.
The N after the port in the code means no gauge is supplied. The body features a 1/8in gauge connection, so you can install your own circular gauge to read the set pressure in the NPT thread scale of MPa/psi.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.