
The AirTAC GAC F.R.L. Unit GAC200N08ALNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic setups, this assembly integrates a filter, regulator and lubricator on a single L-shape bracket. It features a 1/4in port and uses a 5 um element to trap fine particles before they reach sensitive valves. The lower pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi).
Because oil mist is introduced downstream of the regulator seat, the internal components stay clean during operation. The 25 cc condensate sump and 36 cc oil reservoir mean this 750 g unit suits light-duty cycles rather than continuous high-demand lines. An automatic drain clears water without an operator attending the machine. Order code GAC200N08ALNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200N08ALNWT |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, finely filtered 5 um air to delicate pilot valves in lab automation where standard 40 um filtration would cause sticking or premature wear.
Regulates down to the 0.15-0.4 MPa range for delicate contact probes on PCB testing stations, preventing overshoot damage to sensitive electronic components.
Conditions air for single-actuator desktop presses or light-duty pneumatic pick-and-place arms, utilizing the automatic drain to handle intermittent moisture.
Choose this nylon bowl configuration for environments where a synthetic material is preferred over the standard PC or metal options, keeping in mind the shared 1.0 MPa maximum pressure and -5 to 70 C temperature limits apply equally across all bowl types. The 5 um element provides finer filtration than the 40 um standard, ideal for instrument air or precision pneumatics, though it will require more frequent replacement. Since no gauge is supplied, you must add one to the 1/8in gauge connection to read the set pressure, and the NPT thread dictates an MPa/psi scale. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. For maintenance, the GAF200-08, GAR200-08 and GAL200-08 modules are all available separately. Note that the 0.4 MPa ceiling is 44% of the Standard type's 0.9 MPa maximum, so verify your actuators never require more pressure before specifying this part.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 1/4in port, a 5 um element, a 25 cc drain bowl, a 36 cc oil bowl, and weighs 750 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The N in the model code indicates no gauge is supplied from the factory. The body features a 1/8in gauge connection, allowing you to install a compatible pressure gauge separately to monitor the 0.15-0.4 MPa outlet setting.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.