
The AirTAC GAC F.R.L. Unit GAC200N08ASNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port suits light-duty tasks, while the standard pressure range operates from 0.15-0.9 MPa (20-130 psi) with a 40 um element. Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls.
The nylon bowl equips this unit for environments where material compatibility matters, and the automatic drain clears condensate without an operator. No gauge is supplied, but the body features a 1/8in gauge connection if you need to add visual pressure monitoring later. A reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol with details on its own page. Order code GAC200N08ASNTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200N08ASNTK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, lubricated air at a stable pressure to small pneumatic grippers and clamps on benchtop assembly jigs.
Conditions air for individual linear actuators where an automatic drain prevents condensate buildup during intermittent duty cycles.
Supplies metered oil mist and regulated pressure for delicate lab-scale air motors and test fixtures requiring a 1/4in connection.
This 750 g assembly is the smallest size class in the GAC range, making it ideal for mounting directly to a panel or frame rather than supporting via tubing. If your machine demands a higher flow capacity, stepping up to the GAC300 increases the plotted flow envelope from 1750 L/min to 3000 L/min at 0.7 MPa inlet. The automatic drain is decisive for unattended or wet lines, and the 40 um element balances particle capture with service frequency. Because oil mist is added downstream, choose a filter-regulator instead if the line must remain oil-free. Replacement spares share the same body-port suffix: GAF200-08, GAR200-08 and GAL200-08. The 1.0 MPa maximum supply leaves only about 0.1 MPa of headroom above the 0.9 MPa standard setting, so plan a supply near 1.0 MPa if you truly need 0.9 MPa out.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) and carries a maximum pressure of 1.0 MPa (145 psi) with a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 750 g, and uses a 25 cc drain bowl alongside a 36 cc oil bowl. The recommended lubricant is ISO VG 32.
The N in the ordering code indicates no gauge is supplied. The body features a 1/8in gauge connection, allowing you to install a separate gauge if visual pressure verification is required for your setup.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.