
The AirTAC GAC F.R.L. Unit GAC200N08ASTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for single actuators, this AirTAC combination pre-assembles a filter, regulator and lubricator on one L-shape bracket with quick clamps. The 1/4in port and 750 g total mass place it in the compact GAC200 size class, and the 40 um element captures solid grain before the 0.15-0.9 MPa (20-130 psi) standard pressure range is set.
The nylon bowl carries an automatic drain that empties the 25 cc condensate sump without an operator, while a fitted circular gauge reads in MPa/psi for the default NPT thread. A reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue. If the downstream line must stay oil-free, choose a filter-regulator instead because this unit adds oil mist downstream of the regulator seat. Order code GAC200N08ASTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC200N08ASTK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds a single air screwdriver or small grinder on a workbench, using the 1/4in port to deliver steady 0.6 MPa pressure with a controlled oil mist for the motor vanes.
Conditions air for a compact handling jig where the 750 g body mounts directly to an aluminum frame, and the automatic drain clears condensate between cycles.
Supplies regulated air to a testing station, with the nylon bowl resisting accidental knocks and the 40 um element protecting sensitive gauges from pipe scale.
The 1/4in port suits light-duty jigs, and the 25 cc drain bowl means more frequent visits than larger bodies. The 40 um element is standard; step down to a 5 um element for precision instrument air. The automatic drain is decisive for unattended or wet lines, and the fitted gauge lets operators verify the set pressure directly. The three units are separately orderable as GAF200-08, GAR200-08 and GAL200-08, so a clogged element or damaged bowl does not require replacing the whole assembly. The catalogue flow curve for the GAC200 is plotted to 1750 L/min at 0.7 MPa inlet, which is about 58% of the GAC300's 3000 L/min envelope. Because the max supply is 1.0 MPa and the standard type regulates to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the drain bowl holds 25 cc, the oil bowl holds 36 cc, the unit weighs 750 g, and the recommended lubricant is ISO VG 32.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue shows this as a separate pneumatic symbol with details on its own page; it is an ordering difference only.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.